07-18-2019, 08:42 PM | #1 |
Drives: 45th anniversary camaro ss Join Date: Sep 2014
Location: South Carolina
Posts: 131
|
SKINNIES
What`s the best size skinnies to run 4 1/2" or 7". I have 17x10.5 racestar recluse on MT 28x11.5 bias ply on the rear. My car is a manual.
|
07-19-2019, 11:46 AM | #2 |
8.60 @ 157 @ 4200lbs
|
|
07-19-2019, 01:20 PM | #3 |
Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
4.5" fronts.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
07-19-2019, 02:12 PM | #4 |
Drives: 2014 ZL1 Join Date: Apr 2018
Location: KCMO
Posts: 180
|
20x6 on my car it see's more street time though.
|
07-19-2019, 08:28 PM | #5 |
|
4.5 if you plan on more track time over street time. 4.5 also work great on street to strip, go 7 if more street use over track use.
__________________
Car mods: never enough!
|
|
|
|
|