Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > ZL1 Discussions


Phastek Performance


Post Reply
 
Thread Tools
Old 05-11-2023, 06:33 AM   #1
Drnick
 
Drives: 22’ ZL1
Join Date: Dec 2021
Location: Florida
Posts: 381
Wireless charging pad

This pad seems to be to small to work properly
With any newer iPhone which has a case, doesn’t
Lay flat on pad for it to charge, any thoughts
On this? PS larger iPhones,6plus on up with
Otter box case.
Drnick is offline   Reply With Quote
Old 05-11-2023, 06:46 AM   #2
WhiteMale

 
Drives: 23 ZL1 A10 Rapid Blue
Join Date: Aug 2020
Location: MO
Posts: 1,993
Its useless as far as I can tell. Some one else trimmed some of the rubber to get their phone to lay more flat and think it works for him. Otherwise for me the location just isn't too practical.
WhiteMale is online now   Reply With Quote
Old 05-11-2023, 07:16 AM   #3
Chippy
BanHamWatch
 
Chippy's Avatar
 
Drives: 21 ZL1 1LE
Join Date: Jan 2021
Location: Calgary, Alberta
Posts: 248
I really wish someone that had the ability to 3D print took this on. Print a larger cradle that mounts after you remove the rubber pad then the installer can just move the charging base inside the consul up and underneath the new larger printed base.
__________________
2021 ZL1 1LE
Auto
Chippy is offline   Reply With Quote
Old 05-11-2023, 07:38 AM   #4
Drnick
 
Drives: 22’ ZL1
Join Date: Dec 2021
Location: Florida
Posts: 381
It seems that this charging pad only accepts the smaller iPhones,which is 6.1”
Compared to the larger,which is 6.7”…..GM really screwed up on this!!!
Charging pad is useless!!!! The pad measures only 5 5/8” !! To small for even
The smaller iPhones!!!!

Last edited by Drnick; 05-11-2023 at 07:59 AM.
Drnick is offline   Reply With Quote
Old 05-11-2023, 08:08 AM   #5
arpad_m


 
arpad_m's Avatar
 
Drives: 2018 Camaro 2SS A8
Join Date: Jul 2017
Location: East Tennessee
Posts: 11,627
Imagine how much richer you would be if you sold exclamation points... That said, the wireless charging pad is an old 2015 design, and indeed GM could've anticipated larger phone screens. Newer GM trucks and SUVs have a more spacious design, unfortunately the Camaro is the read headed stepchild and did not receive this in later model years.

At least they upgraded the charging module, though, so electrically it is capable of working with newer phones. I'm the one that trimmed the rubber mat, below is how. Other than that, the plastic ridges at the edges of the tray can also be trimmed, but there is an obvious physical limitation, frying pan sized phones will not work.
Attached Images
 
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq

Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune

1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18
arpad_m is offline   Reply With Quote
Old 05-11-2023, 08:21 AM   #6
Vigilante375

 
Drives: 2018 Camaro ZL1
Join Date: Aug 2018
Location: Georgia
Posts: 1,371
Never used it, even though my phone is wireless charging capable.

I just plug in a cable in the center console, plug it in the phone and set it cup holders or next to the gear selector (since I have an A10).

Even if my phone did fit into it, I still wouldn't use it since it's basically in the rear passenger compartment.
Vigilante375 is offline   Reply With Quote
Old 05-11-2023, 08:24 AM   #7
BlueZL1caB
 
Drives: '23 Riverside Blue ZL1 convertible
Join Date: Feb 2023
Location: Hilton Head, SC
Posts: 42
I use mine as a sushi tray
BlueZL1caB is offline   Reply With Quote
Old 05-11-2023, 08:36 AM   #8
Jus Cruisin
Old Gearhead
 
Jus Cruisin's Avatar
 
Drives: 2023 GMC Sierra Denali Ultimate
Join Date: Nov 2018
Location: MI
Posts: 546
It's in a stupid location to begin with. One corner and the phone will be in the rear passenger footwell. Never to be used by me. And not even close to fitting a Samsung Galaxy S22 Ultra.
__________________
2023 Camaro ZL1 convertible - black - SOLD
2023 GMC Sierra Denali Ultimate - black
Jus Cruisin is offline   Reply With Quote
Old 05-11-2023, 09:06 AM   #9
bootss
 
Drives: 2021 ZL1 1LE with PDR
Join Date: Oct 2022
Location: New Hampshire
Posts: 264
I plug my phone in and put it on that pad because it's out of the way then. Wireless charging sucks if you use a beefy phone case anyway.
bootss is offline   Reply With Quote
Old 05-11-2023, 10:35 AM   #10
Drnick
 
Drives: 22’ ZL1
Join Date: Dec 2021
Location: Florida
Posts: 381
So arpad, what phone do you have that actually
Works with the mods you’ve done with the tray?
Drnick is offline   Reply With Quote
Old 05-11-2023, 11:10 AM   #11
mariojas
 
mariojas's Avatar
 
Drives: 2022 ZL1 M6 & 2023 Stinger GT AWD
Join Date: Nov 2021
Location: Detroit Metro, MI
Posts: 452
I took out the rubber layer all together, put a piece of foam to center my phone. Then threw everything to garbage because this charger cannot keep up with Android Auto power consumption and now just use wired cigarette lighter wired charger... Good luck I guess
__________________
2023 Kia Stinger GT AWD - as a family car...
2022 ZL1, M6 as daddy's ass mover

Charger sold! Better to sell, than waiting to be stolen...
mariojas is offline   Reply With Quote
Old 05-11-2023, 12:10 PM   #12
ZED SLED


 
ZED SLED's Avatar
 
Drives: 2017 Mosaic Bk ZL1 M6
Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,479
Only thing more worthless than this is the 100mA rated AC line plug in my 2016 Silverado.
__________________

ZED SLED is offline   Reply With Quote
Old 05-11-2023, 01:15 PM   #13
mariojas
 
mariojas's Avatar
 
Drives: 2022 ZL1 M6 & 2023 Stinger GT AWD
Join Date: Nov 2021
Location: Detroit Metro, MI
Posts: 452
Quote:
Originally Posted by ZED SLED View Post
Only thing more worthless than this is the 100mA rated AC line plug in my 2016 Silverado.
12W AC outlet?
__________________
2023 Kia Stinger GT AWD - as a family car...
2022 ZL1, M6 as daddy's ass mover

Charger sold! Better to sell, than waiting to be stolen...
mariojas is offline   Reply With Quote
Old 05-11-2023, 01:15 PM   #14
arpad_m


 
arpad_m's Avatar
 
Drives: 2018 Camaro 2SS A8
Join Date: Jul 2017
Location: East Tennessee
Posts: 11,627
Quote:
Originally Posted by Jus Cruisin View Post
It's in a stupid location to begin with. One corner and the phone will be in the rear passenger footwell. Never to be used by me. And not even close to fitting a Samsung Galaxy S22 Ultra.
Not really. When I pull 1g in corners, the phone doesn't even slide, let alone fly off the mat. FWIW I have a rubber case that makes for pretty good friction when placed on the rubber mat.

Quote:
Originally Posted by Drnick View Post
So arpad, what phone do you have that actually
Works with the mods you’ve done with the tray?
I have a Samsung S10e, wifey has a larger S10, they both work. I tried a standard S23, that fits as well. The Ultras definitely don't, they're too wide and long. Not sure about the Plus.

Quote:
Originally Posted by mariojas View Post
I took out the rubber layer all together, put a piece of foam to center my phone. Then threw everything to garbage because this charger cannot keep up with Android Auto power consumption and now just use wired cigarette lighter wired charger... Good luck I guess
Dunno, my 2018 has a net positive charging rate even with wireless Android Auto (wifi+bluetooth both on) and continuous use. Not much, but it's positive, I get a 3-5% surplus charge per hour during use.

Then again, I did upgrade the wireless charging module to this one that has higher charging rates and works with newer phones: 84526978. Apparently it's no longer sold by online GM parts vendors (it was removed from the product catalog), but I'm not surprised, this is GM after all...


Look guys, I understand the frustration, this charger design is pretty shortsighted, but if someone really wants to make it work and is willing to go with a smaller phone, it's actually very nice, especially in wireless mode.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq

Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune

1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18
arpad_m is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:27 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.