03-30-2023, 08:23 PM | #1 |
Drives: 2019 ZLE Join Date: Jul 2020
Location: Dallas
Posts: 136
|
Rear stud replacement
I’ve read all the informative threads on how to disconnect the rear suspension, pull the hub, and replace the studs. I’m good there. What I couldn’t find is if I need a rear end alignment after reassembly. Any thoughts would be appreciated.
|
03-31-2023, 06:48 AM | #2 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,813
|
not absolutely necessary as no toe or camber adjustments are touched to remove that hub. You will see when you perform that procedure it isn't a worry.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
03-31-2023, 06:53 AM | #3 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,813
|
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
03-31-2023, 07:52 AM | #4 |
Drives: 2019 ZLE Join Date: Jul 2020
Location: Dallas
Posts: 136
|
Perfect. Thank you.
|
03-31-2023, 08:24 AM | #5 |
Drives: 2019 2SS Camaro Join Date: Apr 2012
Location: Al
Posts: 828
|
the alinement will be off. need to get it aliened after doing this.
|
|
|
Post Reply
|
|
|