What did you do to your 6th Gen Camaro today?! - Page 786

hotlap · 11-07-2021, 04:07 PM

I installed a Silicone License Plate Frame. The plate tucks into a 360 degree lip for a cleaner look then the stainless surround I had used.

http://www.amazon.com/dp/B08JCGJ4F2/...PFNJ59R8TYTME8

Also. I bought the kit with the smoked plate cover and threw it away. Garbage IMO. The silicone plate frame was a nice unintended consequence

hotlap · 11-07-2021, 04:10 PM

I changed the oil and rear diff. It’s been 3000 miles since the last.

I changed the diff a second time in order to inspect the fluid after another 3000 miles. I drained it into a white glass bowl. It was perfect.

I used Mobil 1 0W40 with a WIX filter (22 psi bypass)

willzilla · 11-08-2021, 08:26 AM

Finally got around to installing my Borla ATAK cat-back w/NPP and the AWE link pipes (secondary cat deletes)

Had everything for a few months laying around and just got to knocking it out this weekend, lol.

The first start post install (and.. cold start of the car with zero exhaust, lol, and one of the stock NPP, for reference):

gpskinzhut · 11-08-2021, 09:40 AM

Pondered selling the SS to Vroom. Offering almost what I paid for it with 51k on it.

Chutzpah · 11-08-2021, 10:25 AM

Quote:

Originally Posted by gpskinzhut

Pondered selling the SS to Vroom. Offering almost what I paid for it with 51k on it.

Wow…that’s unbelievable

I’d sell her and order up a new car.

gpskinzhut · 11-08-2021, 11:51 AM

Quote:

Originally Posted by Chutzpah

Wow…that’s unbelievable

I’d sell her and order up a new car.

I paid 37, they gave me an initial offer of 35 which is crazy. They have a glut of them too. I'm debating a ZL1 but there aren't any local for under 60k

Chutzpah · 11-08-2021, 12:58 PM

Quote:

Originally Posted by gpskinzhut

I paid 37, they gave me an initial offer of 35 which is crazy. They have a glut of them too. I'm debating a ZL1 but there aren't any local for under 60k

When I received my initial offer from Vroom on my Mustang, it was 22K. I let that offer expire. A few days later I applied again for another offer, it came back at 24K. I bought the car for 25.7k in 2012… so it was a no brainer. Hard to say whether it’s better to let your offer expire and re apply, or not. Trying to get a Z now is pretty expensive… good luck though. We’ll never see a market like this again…crazy.

clg82 · 11-08-2021, 01:35 PM

Washed it and installed my new BC Forged wheels

arpad_m · 11-08-2021, 06:46 PM

Made my garage floor great again—now on to storage and work areas.

The flooring project cost only $1600 total, and these RaceDeck tiles are pretty sturdy, breaking up the 2x2 blocks they are shipped as was worth half a workout session on its own, heh.

(I know the floor is uneven, the concrete job the previous owner had done is a steaming pile of ****, but we ain't fixing it completely at this time.)

Joshinator99 · 11-08-2021, 06:51 PM

Quote:

Originally Posted by arpad_m

Made my garage floor great again—now on to storage and work areas.

The flooring project cost only $1600 total, and these RaceDeck tiles are pretty sturdy, breaking up the 4x4 blocks they are shipped as was worth half a workout session on its own, heh.

(I know the floor is uneven, the concrete job the previous owner had done is a steaming pile of ****, but we ain't fixing it completely at this time.)

Looks good Arpad!

arpad_m · 11-08-2021, 07:15 PM

Quote:

Originally Posted by Joshinator99

Looks good Arpad!

Thank you, Josh

We'll see how useful the centerline will be, I thought it'd be good to break up the checkerboard pattern a bit.

Chutzpah · 11-08-2021, 08:09 PM

Quote:

Originally Posted by arpad_m

Made my garage floor great again—now on to storage and work areas.

The flooring project cost only $1600 total, and these RaceDeck tiles are pretty sturdy, breaking up the 2x2 blocks they are shipped as was worth half a workout session on its own, heh.

(I know the floor is uneven, the concrete job the previous owner had done is a steaming pile of ****, but we ain't fixing it completely at this time.)

Nice look!

JDaniels609 · 11-09-2021, 04:33 AM

Picked it up from the dealer after a 7 month wait 👍🏻

Joshinator99 · 11-09-2021, 06:00 AM

Quote:

Originally Posted by JDaniels609

Picked it up from the dealer after a 7 month wait 👍🏻

Very nice, welcome aboard!

11-07-2021, 04:07 PM	#10991
hotlap Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014 Location: Franklin WI Posts: 6,632	I installed a Silicone License Plate Frame. The plate tucks into a 360 degree lip for a cleaner look then the stainless surround I had used. http://www.amazon.com/dp/B08JCGJ4F2/...PFNJ59R8TYTME8 Also. I bought the kit with the smoked plate cover and threw it away. Garbage IMO. The silicone plate frame was a nice unintended consequence Attached Images __________________ "the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan - Last edited by hotlap; 11-07-2021 at 08:02 PM.

11-07-2021, 04:10 PM	#10992
hotlap Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014 Location: Franklin WI Posts: 6,632	I changed the oil and rear diff. It’s been 3000 miles since the last. I changed the diff a second time in order to inspect the fluid after another 3000 miles. I drained it into a white glass bowl. It was perfect. I used Mobil 1 0W40 with a WIX filter (22 psi bypass) __________________ "the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan - Last edited by hotlap; 11-07-2021 at 08:03 PM.

11-08-2021, 09:40 AM	#10994
gpskinzhut Drives: 2017 ZL1 A10 Join Date: Aug 2011 Location: Knoxville, TN Posts: 1,960 View My Garage	Pondered selling the SS to Vroom. Offering almost what I paid for it with 51k on it. __________________ 2017 ZL1 A10 2017 2SS M6: (SOLD) \|\| 2014 2LT Convertible: (SOLD) \|\| 2010 2LT M6 Supercharged:(SOLD) \|\| 1987 IROC-Z 5.0 M5: (SOLD)

11-08-2021, 01:35 PM	#10998
clg82 Drives: 2020 Camaro ZL1 Join Date: Oct 2020 Location: Fort Worth, Texas Posts: 1,150	Washed it and installed my new BC Forged wheels __________________ 2020 ZL1 A10 Shadow Gray Metallic Magnuson Magnum DI TVS2650R\| Mamo Throttle Body V2\| RotoFab Intake\| AWE Touring Catback Exhaust\| TCM Tune\| Tune\| Eibach Pro\| BMR Rear Cradle Lockout\| PPF\| Ceramic\| BCForged HCS21

11-08-2021, 06:46 PM	#10999
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,621 View My Garage	Made my garage floor great again—now on to storage and work areas. The flooring project cost only $1600 total, and these RaceDeck tiles are pretty sturdy, breaking up the 2x2 blocks they are shipped as was worth half a workout session on its own, heh. (I know the floor is uneven, the concrete job the previous owner had done is a steaming pile of ***, but we ain't fixing it completely at this time.) Attached Images __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18 Last edited by arpad_m; 11-08-2021 at 07:35 PM.*

11-09-2021, 04:33 AM	#11003
JDaniels609 Drives: ‘22 2ss Join Date: Apr 2021 Location: South Jersey Posts: 172	Picked it up from the dealer after a 7 month wait 👍🏻 __________________ ‘22 2SS A10

User Name		Remember Me?
Password