8.87@155 on a 2300r Maggie 16ss

laynlo15 · 09-30-2019, 08:28 PM

Gen6 Mike went 8.87@155 today. I'm sure he'll post some details later. I know his car is about 3980 full weight with a cage.

parish8 · 09-30-2019, 08:51 PM

Whoa! I am jealous!

laynlo15 · 09-30-2019, 09:10 PM

He went 5.70@123 1/8 mile. Man I just want to get in the 5s my next time out.

ssmofo · 10-01-2019, 08:18 AM

He needs to bring the car to Extreme Dragstrip in Texas, and shut Demonology "the cherry picker" up!

laynlo15 · 10-01-2019, 08:47 AM

I was supposed to run Demonology in St louis but I had an issue just before we were going to run. Herman was running 9.40s@147, I was running 9.40s@146 so would have been a good run. Herman did run an upper 9.20 early in the day before it heated up. Next time we will see.

KingLT1 · 10-01-2019, 10:09 AM

Moving out!

ramairroughneck · 10-01-2019, 10:59 AM

Helluva pass!

ShizzySupra · 10-01-2019, 11:01 AM

No port injection. 2.3 Maggie

/mic drop

Joshinator99 · 10-01-2019, 11:46 AM

Quote:

Originally Posted by ShizzySupra

No port injection. 2.3 Maggie

/mic drop

On that note, how is he fueling that monster?

laynlo15 · 10-01-2019, 06:36 PM

Very close and he has big fuel system.

ShizzySupra · 10-09-2019, 09:44 AM

Just checking, fastest and quickest PD blown 6th gen is a Maggie 2.3?

��

KingLT1 · 10-09-2019, 10:26 AM

Shizzy, you instigator...Lol

ShizzySupra · 10-09-2019, 11:25 AM

Hey its an awesome time to be a gen6 owner! We have killer blowers and even more advanced LT4 blower porting!

Drsagacity · 10-10-2019, 08:14 AM

Quote:

Originally Posted by ShizzySupra

Just checking, fastest and quickest PD blown 6th gen is a Maggie 2.3?

��

You are too much.

09-30-2019, 08:28 PM	#1
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	8.87@155 on a 2300r Maggie 16ss Gen6 Mike went 8.87@155 today. I'm sure he'll post some details later. I know his car is about 3980 full weight with a cage. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff Last edited by laynlo15; 09-30-2019 at 08:46 PM.

09-30-2019, 08:51 PM	#2
parish8 Drives: 17 SS a8 Join Date: Feb 2010 Location: omaha Posts: 1,678	Whoa! I am jealous! __________________ dropped a valve in the 6.2. now running a drop in rods and piston 5.3 best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472

09-30-2019, 09:10 PM	#3
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	He went 5.70@123 1/8 mile. Man I just want to get in the 5s my next time out. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

10-01-2019, 08:47 AM	#5
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	I was supposed to run Demonology in St louis but I had an issue just before we were going to run. Herman was running 9.40s@147, I was running 9.40s@146 so would have been a good run. Herman did run an upper 9.20 early in the day before it heated up. Next time we will see. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

10-01-2019, 10:09 AM	#6
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,799	Moving out! __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

10-01-2019, 08:18 AM	#4
ssmofo Drives: Chevy Camaro Join Date: Jul 2019 Location: Dallas Posts: 420	He needs to bring the car to Extreme Dragstrip in Texas, and shut Demonology "the cherry picker" up!

10-01-2019, 10:59 AM	#7
ramairroughneck Drives: 2018 Camaro SS Join Date: Sep 2009 Location: Oklahoma Posts: 239	Helluva pass!

10-01-2019, 11:01 AM	#8
ShizzySupra Drives: 16' Camaro 2SS Join Date: Sep 2015 Location: Oregon Posts: 381	No port injection. 2.3 Maggie /mic drop __________________ @DeathWatchCamaro on Insta 993whp Magnuson 2.3R 9.5 @ 145, Magnuson 2300, Full Weight 2SS, 17’s (810whp)

10-01-2019, 06:36 PM	#10
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Very close and he has big fuel system. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

10-09-2019, 09:44 AM	#11
ShizzySupra Drives: 16' Camaro 2SS Join Date: Sep 2015 Location: Oregon Posts: 381	Just checking, fastest and quickest PD blown 6th gen is a Maggie 2.3? �� __________________ @DeathWatchCamaro on Insta 993whp Magnuson 2.3R 9.5 @ 145, Magnuson 2300, Full Weight 2SS, 17’s (810whp)

10-09-2019, 10:26 AM	#12
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,799	Shizzy, you instigator...Lol __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

10-09-2019, 11:25 AM	#13
ShizzySupra Drives: 16' Camaro 2SS Join Date: Sep 2015 Location: Oregon Posts: 381	Hey its an awesome time to be a gen6 owner! We have killer blowers and even more advanced LT4 blower porting! __________________ @DeathWatchCamaro on Insta 993whp Magnuson 2.3R 9.5 @ 145, Magnuson 2300, Full Weight 2SS, 17’s (810whp)

User Name		Remember Me?
Password