02-16-2015, 07:36 PM | #1 |
Z28 Replica Project - How To
I want to make a Z28 replica. I don't want badging, or really any of the good stuff (motor, suspension), just general appearance.
Question is, does anyone have all the part numbers needed to do so? I know I need the following: 1) Z/28 AERO COMPONENTS KIT P/N 23489551 / MSRP: $1250.00† Which includes: A front splitter and wheel flare moldings that fit a rear spoiler with a wicker bill (rear spoiler). "The wheel flare moldings are designed to cover wide tires and feature deflectors at the bottom-front corners." --------------------------------- First Question. What do I need for side skirts? Is that another part number? Or are they the same as the 1LE, or what? I assume it needs to be specific to tie into the wheel flares? Second Question. Will the wheel flares tie into the factory SS bumper, or do I need a different rear bumper? Third Question, Wheels... I am getting the MRR 228's, but what front offset do I need to best fit the wheel (with the Z28 wheel flares)? The MRR 228's only come in one offset for the rear, so it is irrelevant. Also, Thanks All. P.S., I am new, just bought my baby (2014 black, SS, RS, L99) a few weeks ago, but got to get her lookin GOOD! |
|
02-16-2015, 07:45 PM | #2 |
Drives: '16 C7 Z51 Join Date: May 2012
Location: Redmond, WA
Posts: 3,056
|
Aero kit does not have flares (~$1K), or rocker panels (~$220x2). You'll also need bolts, etc. for the fender flares. The best wheel option is OEM Z/28 wheels. 228 replicas will be tucked in, so it will look a little bit odd from close up. I also have Apex Arc-8 19x10.5 ET22 wheels (spin-forged; $1576 shipped); these also stick out of OEM SS fenders a bit, so they'd look good with Z/28 flares.
__________________
'16 Corvette C7 Z51 1LT (Build Thread)
'14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD |
02-16-2015, 08:03 PM | #3 |
I didn't see the flares in the pic online, but it has it in the description?
|
|
02-16-2015, 08:15 PM | #4 |
Just to clarify the options on the offsets on the MRR 228 are +35 or +23. Which would be best to fit with wheel flares?
|
|
02-17-2015, 09:28 AM | #5 |
Todd
|
probably the +23 due to the flares. Just my opinion though.
|
02-18-2015, 11:45 PM | #6 |
What is the part number for the z28 rocker panels?
|
|
02-18-2015, 11:51 PM | #7 | |
Drives: '16 C7 Z51 Join Date: May 2012
Location: Redmond, WA
Posts: 3,056
|
Already listed in parts list sticky under Z/28 section:
Quote:
__________________
'16 Corvette C7 Z51 1LT (Build Thread)
'14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD |
|
10-13-2015, 12:58 PM | #8 |
La Makina2
Drives: 2018 ZL1 1LE Join Date: Sep 2015
Location: DAVENPORT
Posts: 61
|
|
01-04-2016, 12:00 AM | #9 |
Drives: 2014 Camaro SS Join Date: Oct 2014
Location: Valley Center
Posts: 186
|
Do the Z28 rocker moldings fit an SS?
|
01-04-2016, 09:35 PM | #10 |
Jumanji
Drives: '14 Z/28 - AGM - No A/C Join Date: Mar 2014
Location: Alaska
Posts: 1,688
|
|
01-13-2016, 10:02 PM | #11 |
Drives: 2014 Camaro SS Join Date: Oct 2014
Location: Valley Center
Posts: 186
|
Don't 2 flares come with the aero package? In the description it says it comes with "wheel flare moldings." It shows two flares on the picture.
|
01-22-2016, 08:58 AM | #12 |
Drives: 2010 Rally Yellow 2SS/RS 6M ~~ LSA Join Date: Sep 2013
Location: DFW, Tx
Posts: 200
|
Subscribed
__________________
---Tiffany, the car junkie
HALNSS |
01-22-2016, 12:57 PM | #13 |
Drives: 2014 Camaro SS Join Date: Oct 2014
Location: Valley Center
Posts: 186
|
Just got my package. The flare moldings are the ones that go with the splitter.
|
01-22-2016, 01:50 PM | #14 |
Drives: 2015 Z28 Join Date: Feb 2014
Location: TX
Posts: 34
|
There is a Z28 carbon hood vent for sale if someone is looking.
http://www.camaro5.com/forums/showth...ght=Z28+INSERT |
|
|
Tags |
mrr 228, replica, z28 |
|
|