12-27-2019, 10:39 AM | #29 |
@viurniel
Drives: 19 ZLE A10, 15 2SS, 90 300ZXTT Join Date: May 2016
Location: Miami
Posts: 409
|
Maybe some do. Mine is flush.
|
12-27-2019, 11:07 AM | #30 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
Point being.......in mass production you will have issues......
|
12-27-2019, 11:55 AM | #31 |
@viurniel
Drives: 19 ZLE A10, 15 2SS, 90 300ZXTT Join Date: May 2016
Location: Miami
Posts: 409
|
That center post has a little gap on many factory cars, but is not the same as the issues with the vendor items posted here - specially with the side post gaps and the finish issues. Don't let that factory center post gap be the vendor's excuse to miss the fitment and provide items with obvious QA issues. If anything, they should be improving the design and fit.
|
12-27-2019, 02:37 PM | #32 |
DEVLMAN
Drives: White 2018 ZL1 Join Date: Dec 2017
Location: Chandler, AZ
Posts: 66
|
|
12-27-2019, 04:57 PM | #33 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
B. Aftermarket isn't gonna fit like OEM.....
|
12-27-2019, 05:28 PM | #34 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,816
|
i used to work for an aftermarket aero company that even copied some of the oem gm parts and acs parts fitment was horrible and quality wasnt any better
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
04-28-2020, 10:36 PM | #35 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
Wing
This angle look right to yall?
|
04-29-2020, 12:45 AM | #36 |
Drives: 2018 NFG ZL1-1LE Join Date: Jun 2018
Location: Near the water
Posts: 304
|
Looks like it has too much angle tilted down in the front. Also looks more squared off on the forward edge. I will add these pics here for reference.
Last edited by Rnovrit; 04-29-2020 at 01:00 AM. |
06-06-2020, 05:13 PM | #38 |
Drives: 2018 Camaro ZL1 Join Date: Feb 2020
Location: Seattle
Posts: 8
|
Put mine on today and very unhappy with it. Not only a pain in the ass to install with the wack hardware fitment, but the angle looks STUPID. Does not look anything like their website or promoted videos. Nothing like the OEM.
|
06-06-2020, 05:25 PM | #39 |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
Wow. Definitely not a fan of that. It just kinda looks out of place.
|
06-06-2020, 05:41 PM | #40 |
Drives: 2018 Camaro ZL1 Join Date: Feb 2020
Location: Seattle
Posts: 8
|
|
06-06-2020, 08:12 PM | #41 |
Drives: 2018 Camaro ZL1 Join Date: Feb 2020
Location: Seattle
Posts: 8
|
|
06-06-2020, 08:47 PM | #42 |
aka BeastZL1
Drives: 2019 Camaro ZL1 1LE, 2004 Cobra Join Date: Dec 2017
Location: NC
Posts: 1,103
|
It looks like Anderson Composites is the way to go.
__________________
|
|
|
Post Reply
|
|
|