[red_johnny]

Well I finally upgraded my system. I added subs. Used the sub- thump kit and everything else was skar. 2 10’s with the EVL kit. 2000 watt amp. I still need to carpet the plywood and manage the wire under it. Still playing with settings to get the sound I want.

Have pics but can’t get them to upload on my mobile device.

[SomeGeoffGuy]

Nice - where did you get the signal - did you get the T-harness from the place you got the box from?

-Geoff

[red_johnny]

Originally Posted by SomeGeoffGuy

Nice - where did you get the signal - did you get the T-harness from the place you got the box from?

-Geoff

I got the T-harness. The box came from Skar with the 10's preloaded and set up for 1 OHM. I got to figure out why the amp is not pushing the subs as hard as it should be. At 2000 watts RMS these should be hitting much harder. I feel as its more like at the 800-1000 range.

[Plasar]

red_johnny:

* Sounds like a great plan for more bass.
* I’ve got a ZL1 vert with an upgraded stereo from the stock Bose. I’ve got 600 watts and portable JL 10 inch woofer enclosure. I get enough thump for me.
* With your large enclosure, 2 x 10s, and 2,000 watts, you should be knocking over trees.
* Are you sure you set the gains correctly?
* Are you sure you are getting the current you need for 2,000 watts at 12 volts? I like this guy for installation tips.

https://youtu.be/NixHUNo0YII?si=k2UXROztiM13Y1bp

[SomeGeoffGuy]

Originally Posted by Plasar

red_johnny:

* Are you sure you are getting the current you need for 2,000 watts at 12 volts? I like this guy for installation tips.

Yea, that thing has got to be pulling crazy amperage at 1 ohm!

-Geoff

[red_johnny]

Originally Posted by SomeGeoffGuy

Yea, that thing has got to be pulling crazy amperage at 1 ohm!

-Geoff

Pretty sure I need a second battery. I will check out that video for