01-04-2019, 01:34 PM | #1 |
Drives: 2016 ss camaro Join Date: Jan 2018
Location: Bellflower ca
Posts: 199
|
Micky Thompson et street R bias ply
Hello,
Has anyone ran a 28x11.5-17 on 17x9.5 race stars? I’m currently running 28x10.5 Hoosiers. Great tire, but I am tired of having to swap tires out. These new mt bias plys are dot ! Any input would be greatly appreciated, thanks.
__________________
|
01-23-2019, 01:12 PM | #2 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Interested as well.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
01-23-2019, 01:29 PM | #3 |
Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017
Location: San Antonio Texas
Posts: 843
|
don't think that would fit, i'm running the et street rs on my 17x10.5 racestars just fine. not the bias ply though. i heard bias ply won't last/ at least if you plan to highway drive them.
__________________
Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves
Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw |
02-01-2019, 09:25 AM | #4 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
Here is my setup, I have not been to the track yet, but i have made a few pulls on the street. I did notice either my street tire setup or this track setup rubbed in the drivers side rear inner fender liner, which I did move the harness that runs up thru there. other than that it seems to fit, its tight though. I am running a 10.5 wide wheel versus your 9.5 wide wheel.
Front Wheels: Race Star 92's 17x4.50 5x120BC 1.75"BS GLOSS BLACK Tires: M/T ET FRONT 27.5/4.0-17 Rear Wheels: Race Star 92's 17x10.5 5x120BC 7" BS GLOSS BLACK Tires: M/T ET STREET R BIAS 28x11.5-17
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
02-03-2019, 02:43 PM | #5 |
Drives: 2018 SS 1LE Join Date: May 2018
Location: Arizona
Posts: 292
|
Here’s my set-up... LOVE driving this on the street
*DragStar 17x9.5 #92-795252G *Mickey Thompson ET Street R’s P275/40-17 *DragStar - 18x5 #92-850245G *M&H - 185/50R18
__________________
🌽 Sauced, 2018 SS 1LE - 123mph @ 5,000 DA
ARH 2”x3” FULL System, Pray Ported MSD Intake Manifold, Pray Ported GM 95mm TB, RotoFab CAI, DsX e85 Kit, MightyMouse Catch Can, NicD Tune https://instagram.com/corn_sauced?ut...d=o0ako89uurwl |
03-07-2020, 01:24 PM | #6 |
Drives: chevy Camaro Join Date: Aug 2019
Location: Rockoway
Posts: 20
|
I will post as soon as I receive my VMS 17x10 wheels. I am going to mount MT 28x11.5 on them as far as I know hopefully harness relocation should help. Any input appreciated.
|
03-19-2020, 12:06 PM | #7 |
Drives: chevy Camaro Join Date: Aug 2019
Location: Rockoway
Posts: 20
|
28x11.5 17 on VMS 17x10
Car is lowered on GM lowering springs and Bremen brakes It’s a close fit but no rubbing so far on street driving. |
04-04-2020, 03:33 PM | #8 |
Drives: 2017 Chevy Camaro 2SS Join Date: Dec 2019
Location: Rockwall TX
Posts: 15
|
hey sir love the new wheels and just received my 17x10s with 18x5 fronts now just waiting for my tires to show up going for the bolt on M6 record lol anyway which lug nuts did you use if you dont mind me asking?
|
04-04-2020, 07:31 PM | #9 |
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,678
|
How do they feel with the radials in the front?
__________________
‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122
‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
04-08-2020, 11:54 AM | #10 |
Drives: chevy Camaro Join Date: Aug 2019
Location: Rockoway
Posts: 20
|
|
04-08-2020, 11:56 AM | #11 |
Drives: chevy Camaro Join Date: Aug 2019
Location: Rockoway
Posts: 20
|
Call Bruce’s speed shop at 973 664 0192. He had them there. Kind of steep@ $75 but I knew they were the proper ones.
|
04-24-2020, 03:10 PM | #12 |
SITH SS
Drives: 2017 Camaro 2SS Convertible Join Date: Sep 2017
Location: Melissa, TX
Posts: 28
|
Did you relocate the harness?
__________________
2.9L Whipple, Rotofab, TSP 2" LT's, Cat deletes, SMG flex kit, Snow meth system and Calibrated by Karger. Custom black stainless dress up by American Car Craft.
|
05-12-2020, 08:47 PM | #13 |
Drives: chevy Camaro Join Date: Aug 2019
Location: Rockoway
Posts: 20
|
|
|
|
Post Reply
|
|
|