HUD Not Working - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rednecks70 · 08-09-2019, 12:02 PM

Just noticed the HUD will slowly fade and then go completely out after about a minute of having the car started. Odd thing is putting on either turn signal will make it reappear at normal brightness for about a minute then it slowly fades and goes completely out again. Tried toggling through the different displays and turning the brightness up and down, the only thing that makes it come back on is the turn signal or starting the car. Any idea what is wrong with it?

ABADZL1 · 08-09-2019, 12:22 PM

HUD module is on it's way out.

rednecks70 · 08-09-2019, 12:24 PM

Quote:

Originally Posted by ABADZL1

HUD module is on it's way out.

DOH!

Anyone know how difficult (or expensive) it is to replace it?

ABADZL1 · 08-09-2019, 01:11 PM

Mine was replaced under warranty a few years back. Seats, center console, and entire dash has to come out

hammdo · 08-09-2019, 01:17 PM

Blownfogger540 had used color ones for $125 shipped. I bought one for when I decide to pull the dash and replace the monochrome one...

-Don

rednecks70 · 08-09-2019, 03:03 PM

Well this sucks, sounds pretty invasive.

Last year I dropped the dash (not pulled out) in my sons 01 Ram to replace the heater core, it was definitely time consuming and difficult at times but not insanely hard. I can't imagine what hurdles there would be doing a 13 ZL1. Is there an online write up or step by step guide anywhere to review?

I may just do without it although I really do like the feature.

gtstorey · 08-09-2019, 03:32 PM

https://www.camaro5.com/forums/showt...&highlight=hud

hammdo · 08-09-2019, 03:35 PM

https://www.camaro5.com/forums/showthread.php?t=146851

-Don

rednecks70 · 08-10-2019, 07:18 AM

Thanks for the info. Oddly enough when I drove home it worked fine and never went out.

08-09-2019, 12:02 PM	#1
rednecks70 Drives: 2013 AGM ZL1, '70 Chevelle 454 Join Date: Apr 2019 Location: Willow Grove, PA Posts: 105	HUD Not Working Just noticed the HUD will slowly fade and then go completely out after about a minute of having the car started. Odd thing is putting on either turn signal will make it reappear at normal brightness for about a minute then it slowly fades and goes completely out again. Tried toggling through the different displays and turning the brightness up and down, the only thing that makes it come back on is the turn signal or starting the car. Any idea what is wrong with it?

08-09-2019, 12:22 PM	#2
ABADZL1 ZL1 Pilot Drives: 2013 ZL1 Join Date: Apr 2014 Location: TN Posts: 1,670 View My Garage	HUD module is on it's way out. __________________ GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs

08-09-2019, 01:11 PM	#4
ABADZL1 ZL1 Pilot Drives: 2013 ZL1 Join Date: Apr 2014 Location: TN Posts: 1,670 View My Garage	Mine was replaced under warranty a few years back. Seats, center console, and entire dash has to come out __________________ GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs

08-09-2019, 01:17 PM	#5
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Blownfogger540 had used color ones for $125 shipped. I bought one for when I decide to pull the dash and replace the monochrome one... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

08-09-2019, 03:35 PM	#8
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	https://www.camaro5.com/forums/showthread.php?t=146851 -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

08-09-2019, 03:03 PM	#6
rednecks70 Drives: 2013 AGM ZL1, '70 Chevelle 454 Join Date: Apr 2019 Location: Willow Grove, PA Posts: 105	Well this sucks, sounds pretty invasive. Last year I dropped the dash (not pulled out) in my sons 01 Ram to replace the heater core, it was definitely time consuming and difficult at times but not insanely hard. I can't imagine what hurdles there would be doing a 13 ZL1. Is there an online write up or step by step guide anywhere to review? I may just do without it although I really do like the feature.

08-09-2019, 03:32 PM	#7
gtstorey Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017 Location: Huntsville, AL Posts: 2,147	https://www.camaro5.com/forums/showt...&highlight=hud

08-10-2019, 07:18 AM	#9
rednecks70 Drives: 2013 AGM ZL1, '70 Chevelle 454 Join Date: Apr 2019 Location: Willow Grove, PA Posts: 105	Thanks for the info. Oddly enough when I drove home it worked fine and never went out.