9.34 @ 143.57MPH: NA Stock Bottom End - Page 3

bhillakaiceberg · 10-14-2019, 02:54 PM

Quote:

Originally Posted by laynlo15

Mike Swanson just went 8.72@156 with our Magnuson 2650 Heartbreaker, he's running a Steven Rankin A8 and launching in 2nd gear and its holding up just fine at a 1070 rwhp. Probably has at least 30 passes now plus a lot of dyno time. That's way cheaper then swapping and he can still enjoy all the cruising by just switching a pulley/belt and retuning and go out on the highway and run 80 mph at 1800 rpms, try that with a Turbo 350.

Yea..I chatted with Mike yesterday...that car is getting busy!!

17camaroSS · 11-14-2019, 04:01 AM

Quote:

Originally Posted by bhillakaiceberg

LOL. Sorry forgot to post.

E85 Fuel
CID Heads with some additional work from the late great Jim Kuntz from Kuntz and Company Racing Engines
GPI Hydraulic Cam on Cam Motion core
Holley Hi-Ram Intake with Katech 103MM Throttle Body
Custom Converter from Circle D Specialties
Aerospace Components Brake Kit front and rear

Kind of curious, are you running 1 7/8 or 2” longtubes?

bhillakaiceberg · 11-15-2019, 11:06 AM

Quote:

Originally Posted by 17camaroSS

Kind of curious, are you running 1 7/8 or 2” longtubes?

2"in Holley Headers

17camaroSS · 11-16-2019, 04:06 PM

Quote:

Originally Posted by bhillakaiceberg

2"in Holley Headers

Any issues with leaks with the two piece design?? That’s the only thing I was concerned about.

JROC · 11-16-2019, 09:15 PM

Man that is bad ass! Congrats.

Is that with stock ci's? I'm guessing if you're turning 8,000 RPM's you're not running a longer stroke than factory?

bhillakaiceberg · 11-18-2019, 10:22 AM

Quote:

Originally Posted by 17camaroSS

Any issues with leaks with the two piece design?? That’s the only thing I was concerned about.

No issues so far.

Quote:

Originally Posted by JROC

Man that is bad ass! Congrats.

Is that with stock ci's? I'm guessing if you're turning 8,000 RPM's you're not running a longer stroke than factory?

Thanks man! yes Stock Bottom End 376. Shift at like 7800...goes thru traps a tad over 8000 RPM

laynlo15 · 11-18-2019, 10:27 AM

That's crazy turning that stock short block 8000 rpm with stock cast pistons.

RobbyBeefcake87 · 11-18-2019, 12:53 PM

Did you break your own record at Fall Brawl?

bhillakaiceberg · 11-18-2019, 01:01 PM

Quote:

Originally Posted by RobbyBeefcake87

Did you break your own record at Fall Brawl?

Unfortunately no, something is going on with my rear end. I gotta get under there and see whats up.

bhillakaiceberg · 12-02-2019, 09:57 AM

Ran a NEW BEST this past wknd.....9.344 @ 143.57. Done for the season...New build underway soon.

3400lbs Raceweight with me.

KingLT1 · 12-02-2019, 01:09 PM

Nice pass! What will the new build be?

laynlo15 · 12-02-2019, 03:21 PM

Geeeezzzz Louise, that's another crazy ass pass and almost all was gained in the 1/8 mile. That 3400 lbs with you in the car still freaks me out. I know you way lighter then me but my 3890 dwarfs your. They Holley High Rams aren't light but obviously lighter then my blower. How ever you have done it is impressive. Congrats

wnta1ss · 12-03-2019, 05:26 AM

Quote:

Originally Posted by bhillakaiceberg

Ran a NEW BEST this past wknd.....9.344 @ 143.57. Done for the season...New build underway soon.

3400lbs Raceweight with me.

Congrats, normally aspirated and going that quick, impressive

grampa_ss · 12-03-2019, 06:34 AM

Congrats on the new PB!

11-18-2019, 10:27 AM	#35
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	That's crazy turning that stock short block 8000 rpm with stock cast pistons. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

11-18-2019, 12:53 PM	#36
RobbyBeefcake87 Drives: 2018 Camaro SS 1LE Join Date: Aug 2018 Location: Tampa Florida Posts: 1,980	Did you break your own record at Fall Brawl? __________________ 2000 Miata - aventi storm wheels, roll bar. 2019 Mustang GT pp1 - svt pp2 wheels, mbrp cat back, sync 3 upgrade, p1x procharger + stg2 intercooler. 2018 Colorado zr2 - zr2 sport bar, showcase spare tire. 2018 Camaro SS 1LE - GM cai, black bowties, suede knee bolsters, 1le plate frame, black fuel door, dark tails + 3rd brake light, euro side markers + led's, GM all weather floor mats, velossatech big mouth, GM strut brace. 2017 Corvette Grandsport (sold) - untouched. 2006 GTO (sold) - iat relocation, air box mod, monero side marker lights.

12-02-2019, 09:57 AM	#38
bhillakaiceberg Drives: 2011 2SS/RS & 2017 1SS Join Date: Apr 2011 Location: Maryland Posts: 1,960	Ran a NEW BEST this past wknd.....9.344 @ 143.57. Done for the season...New build underway soon. 3400lbs Raceweight with me. Attached Images __________________ *2011 Chevrolet Camaro 2SS/RS L99* (1 of 782) 10.78 @125mph ALL MOTOR SBE Built/Tuned by Me 2017 Chevrolet Camaro 1SS Auto 9.29 @144.57mph ALL MOTOR SBE #TEAMGPI Gwatney Performance Innovation

12-02-2019, 01:09 PM	#39
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,793	Nice pass! What will the new build be? __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

12-02-2019, 03:21 PM	#40
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Geeeezzzz Louise, that's another crazy ass pass and almost all was gained in the 1/8 mile. That 3400 lbs with you in the car still freaks me out. I know you way lighter then me but my 3890 dwarfs your. They Holley High Rams aren't light but obviously lighter then my blower. How ever you have done it is impressive. Congrats __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff Last edited by laynlo15; 12-02-2019 at 03:35 PM.

11-16-2019, 09:15 PM	#33
JROC Account Suspended Drives: 19 Camaro SS 1LE, 03 Ford Lightning Join Date: Nov 2019 Location: South Carolina Posts: 334	Man that is bad ass! Congrats. Is that with stock ci's? I'm guessing if you're turning 8,000 RPM's you're not running a longer stroke than factory?

12-03-2019, 06:34 AM	#42
grampa_ss Drives: 2016 Camaro 2SS Join Date: Apr 2017 Location: Stansbury Park, Utah Posts: 1,092	Congrats on the new PB! __________________ 2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000 New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth.

User Name		Remember Me?
Password