10-20-2019, 11:50 AM | #1 |
Drives: 2017 camaro SS 1LE Join Date: Jan 2017
Location: North Carolina
Posts: 159
|
Manual to TH400
For those of you curious about the general cost with swapping your Camaro to a TH400 I made a video with links to where I got everything. My car was an M6 car prior to the swap.
https://youtu.be/8hOQyHlkEI4
__________________
2017 1000+hp Camaro SS
88/96 single turbo manual to TH400 swap 15" conversion Port injection 22K+ followers on Instagram @Sixgunsled 6.4K subscribers YouTube: Sixgunsled |
11-27-2019, 10:29 PM | #2 |
Drives: 2016 1ss GPI built Join Date: Nov 2019
Location: cabot arkansas
Posts: 6
|
Did you keep the center console in the car or pull it out?
|
04-14-2020, 02:13 PM | #3 |
Drives: 2017 camaro SS 1LE Join Date: Jan 2017
Location: North Carolina
Posts: 159
|
I kept it. everything fits where the old manual shifter was. You just need something to lift the rear of the shifter mount up about an inch so when you pull down to third gear it clears the console.
__________________
2017 1000+hp Camaro SS
88/96 single turbo manual to TH400 swap 15" conversion Port injection 22K+ followers on Instagram @Sixgunsled 6.4K subscribers YouTube: Sixgunsled |
01-11-2023, 05:14 PM | #4 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
https://cordesperformanceracing.com/...0-crossmember/
Cordes now makes a crossmember so the swap gets that much easier.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
|
Post Reply
|
Thread Tools | |
|
|