Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > 2016+ Camaro: 6th Gen Camaro general forum


Bigwormgraphix


Post Reply
 
Thread Tools
Old 08-21-2018, 09:12 PM   #5741
Cmax
 
Cmax's Avatar
 
Drives: 2017 Camaro 2SS FIFTY convertible
Join Date: Sep 2014
Location: Cincinnati
Posts: 366
Quote:
Originally Posted by dfwcowboy View Post
I don’t have pics of mine at the moment, but it’s pretty easy to tell where they go because there’s cutouts in the rocker panels. In the front there’s two cutouts on each side and in the rear there’s one on each side for six total. So in the front you have two different locations. I suspect most people are putting the front ones on the most aft position so you can put axle stands on the front most positions.
Exactly right!..... installation is intuitive. I unscrewed the set screws to take a drop of blue loctite so they don’t loosen up....

Last edited by Cmax; 08-22-2018 at 06:17 AM.
Cmax is offline   Reply With Quote
Old 08-21-2018, 09:27 PM   #5742
dfwcowboy
 
dfwcowboy's Avatar
 
Drives: 2024 ZL1 M6, 1969 Cessna Skylane
Join Date: Jun 2018
Location: Dallas
Posts: 368
Quote:
Originally Posted by Cmax View Post
Exactly right!..... installation is intuitive. I unscrewed the set screws to take a drop of blue locative so they don’t loosen up....
I did blue locktight on mine as well. I’m probably never going to check if they are still tight, so it gives a bit of insurance against losing them.
dfwcowboy is offline   Reply With Quote
Old 08-21-2018, 11:31 PM   #5743
chutoyy
knows nothing...
 
Drives: 2SS 1LE
Join Date: Aug 2009
Location: Seattle-ish, WA
Posts: 151
Finished up my headlight mod... Ignore the mess.

Here's ZKW-R clear lens and shield mod w/ Osram 66340 CBB.

__________________
'18 6MT 2SS 1LE G7Q
chutoyy is offline   Reply With Quote
Old 08-21-2018, 11:42 PM   #5744
CUPRA

 
CUPRA's Avatar
 
Drives: '21 Bronco OBX/'18 Jeep GC Altitude
Join Date: Jul 2008
Location: Keller, TX
Posts: 1,413
Installed the Hero Smoked Reflectors from Phastek Performance this past weekend. Not the easiest of installs, but at least I didn't have to remove the rear bumper as was first feared!

Not 100% convinced that they are DOT/SAE compliant even tho they are stamped, simply because there are no 'official' numbers after them, relating to the position on the vehicle, just DOT and SAE.







__________________
Order Placed: 04/30/22
Order Accepted: 10/18/22
TPW: 11/07/22
Built: 11/18/22
VIN received: 11/19/22
On a Train: 02/27/23
ETA: TBD

2023 Camaro 2SS Convertible/M6/Shadow Grey Metallic/Adrenaline Red Interior/Carbon Flash Wheels/NPP
CUPRA is offline   Reply With Quote
Old 08-22-2018, 04:51 PM   #5745
arpad_m


 
arpad_m's Avatar
 
Drives: 2018 Camaro 2SS A8
Join Date: Jul 2017
Location: East Tennessee
Posts: 11,499
Quote:
Originally Posted by CUPRA View Post
Not 100% convinced that they are DOT/SAE compliant even tho they are stamped, simply because there are no 'official' numbers after them, relating to the position on the vehicle, just DOT and SAE.
Depends on the laws of your state, here in NJ rear reflectors are expressly required to be red, so these would technically be illegal (along with non-red rear and non-amber front side markers).
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq

Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune

1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18

Last edited by arpad_m; 08-23-2018 at 11:41 PM. Reason: typo
arpad_m is offline   Reply With Quote
Old 08-22-2018, 05:02 PM   #5746
Wyzz Kydd
Banned
 
Drives: 2018 Camaro SS1 1LE
Join Date: Feb 2017
Location: Georgia
Posts: 1,595
Installed front and back ZL1 Addons rock guards. Very easy to do and look great. I didn't take the rear tires off, I just used a very short Phillips head screwdriver. I'll post pics shortly!
Wyzz Kydd is offline   Reply With Quote
Old 08-22-2018, 05:21 PM   #5747
TRZ06

 
TRZ06's Avatar
 
Drives: 22' Porsche PDK GT4
Join Date: Mar 2018
Location: Bay Area
Posts: 2,013
Quote:
Originally Posted by chutoyy View Post
Finished up my headlight mod... Ignore the mess.

Here's ZKW-R clear lens and shield mod w/ Osram 66340 CBB.

What does this do from the factory HID system? I also have an 18' SS 1LE, I am really wanting LED's
__________________
Current:
22' Porsche PDK GT4 (MCS 2-way remote dampers)

Previous:
18' NFG 2SS 1LE (ZL1 1LE solid rear cradle bushings & Corsa Exhaust)
16' F80 M3 (Ohlin R/T Coilovers)
13' Audi TTRS (APR Stage 1, MSS Springs)
09' C6 Z06
08' E90 M3
06' 335i (KW V2 Coilovers)
03' C5 Z06
TRZ06 is offline   Reply With Quote
Old 08-22-2018, 07:13 PM   #5748
Zack46


 
Zack46's Avatar
 
Drives: 2018 2SS Camaro Hot Wheels Edition
Join Date: Sep 2015
Location: Cleveland, Ohio
Posts: 2,814
Quote:
Originally Posted by TRZ06 View Post
What does this do from the factory HID system? I also have an 18' SS 1LE, I am really wanting LED's
__________________
Zack46

2018 Camaro 2SS Orange Crush Hot Wheels Limited Edition
Power Sunroof, 8 Speed Auto/Remote Start, NPP Exhaust
Production Sequence Number 98
NEOCC Camaro Club Member

Former Ride: 2016 Camaro 2LT RS V6 Hyper Blue Metallic
Zack46 is offline   Reply With Quote
Old 08-22-2018, 10:07 PM   #5749
18LTLoveIt

 
18LTLoveIt's Avatar
 
Drives: 2018 Hyper Blue LT RS
Join Date: Dec 2016
Location: Phoenix AZ
Posts: 1,474
Storms brewing, took my Clinton/Kaine 2016 magnet off trunk (paper underneath so magnet doesn't fuse to the paint. It happened once on my 2008 Stang with my round GOBAMA magnet).
18LTLoveIt is offline   Reply With Quote
Old 08-22-2018, 10:50 PM   #5750
20181le
 
20181le's Avatar
 
Drives: 2019 ZL1 1LE Coming Soon!
Join Date: Jun 2018
Location: Wrenching on car!
Posts: 49
I ordered some decals and a rotofab!
20181le is offline   Reply With Quote
Old 08-23-2018, 10:06 AM   #5751
chutoyy
knows nothing...
 
Drives: 2SS 1LE
Join Date: Aug 2009
Location: Seattle-ish, WA
Posts: 151
Quote:
Originally Posted by TRZ06 View Post
What does this do from the factory HID system? I also have an 18' SS 1LE, I am really wanting LED's
It is a projector lens swap, cut off shield adjustment and different bulbs. Here is a before
__________________
'18 6MT 2SS 1LE G7Q
chutoyy is offline   Reply With Quote
Old 08-23-2018, 09:13 PM   #5752
hotlap


 
hotlap's Avatar
 
Drives: 20 1LE 2SS M6 Rally Green
Join Date: Mar 2014
Location: Franklin WI
Posts: 6,632
I sold it and bought a 2018 Hot Wheels 2SS M6 NPP.
__________________

"the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.”
Ronald Reagan -
hotlap is offline   Reply With Quote
Old 08-24-2018, 07:27 AM   #5753
Camaro SV
 
Drives: Camaro 1LT V6
Join Date: Aug 2018
Location: Dubai
Posts: 5
.

Hello Gents!

I present you my 2017 modded Camaro V6 1LT USA spec, along with my touches.. My concept was to make this car as sporty and fast as possible given the budget I had. Somewhat inspired by my favorite car the Lamborghini Aventador SV.. I have done some work on it. I have modified the look of the exterior and performance.

Performance: K&N typhoon air filter and cold air intake installed, MRT V3 straight pipe exhaust system. The sound from this car doesnt sound like a v6 at all! LOUD AF it literally screams!!

Exterior: Front and Rear splitter and side skirts, ZL1 20 inch wheels with Pirelli P ZEROs, Debadged the rear trunk, Coplus rear lights.. Recently installed the ZL1 style Wing (unfortunately its made from plastic) well I inquired or the Carbon fiber ZL1 wing from Hammersports but they advised me not to go with it as it is too heavy. Which doesnt make sense since its carbon fiber.. But ya here is the wing and I think it looks ok for ABS plastic. Please guys I need your opinions on what you think of the look now and your thoughts on how I can make it even better. I was thinking of adding Pirelli white Tyre letters but not sure about it yet..


[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]


Last edited by Camaro SV; 08-24-2018 at 07:34 AM. Reason: ..
Camaro SV is offline   Reply With Quote
Old 08-24-2018, 10:55 AM   #5754
Soleil

 
Soleil's Avatar
 
Drives: Camaro 50th anniversary edition
Join Date: May 2017
Location: Europe
Posts: 2,203
Next to the Lambo the tail lights look awesome. Maybe you could add some bigger wheels/tires or at least som spacer. Lowering with H&R V3 adjustable suspension.
__________________
Soleil
_____________________________________________
A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl)
Soleil is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:09 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.