01-13-2019, 06:27 PM | #1 |
Drives: 17' Turbocharged Camaro Join Date: Jan 2019
Location: Florida
Posts: 24
|
Camaro 6th gen negative terminal
Anybody know where I can locate my ground. Found the negative terminal in the trunk but can't find my ground in the engine bay
Last edited by b1gpoppa; 01-14-2019 at 01:32 PM. |
01-13-2019, 06:31 PM | #2 |
Drives: 2017 GRT 2SS/RS M6 Vert Join Date: Jan 2014
Location: Oro Valley
Posts: 1,200
|
Negative terminal in trunk.
__________________
If it were more fun, it would be illegal!
|
01-13-2019, 06:33 PM | #3 |
Drives: 2017 GRT 2SS/RS M6 Vert Join Date: Jan 2014
Location: Oro Valley
Posts: 1,200
|
However... the long bolt w/ the yellow mark looks like the ground
__________________
If it were more fun, it would be illegal!
|
01-13-2019, 07:01 PM | #4 |
Drives: SS,PaceCar,ZL1,1LE,C7Z51,Z06,17-ZL1 Join Date: Jun 2009
Location: Detroit, Mich
Posts: 68,623
|
|
01-13-2019, 07:25 PM | #5 |
Drives: 2017 GRT 2SS/RS M6 Vert Join Date: Jan 2014
Location: Oro Valley
Posts: 1,200
|
I ❤️ Becky!
__________________
If it were more fun, it would be illegal!
|
01-13-2019, 07:28 PM | #6 |
Drives: 2017 HBM 2LT RS Convertible V6 A8 Join Date: Jan 2018
Location: NJ
Posts: 654
|
From the manual
|
01-13-2019, 07:33 PM | #7 |
Drives: SS,PaceCar,ZL1,1LE,C7Z51,Z06,17-ZL1 Join Date: Jun 2009
Location: Detroit, Mich
Posts: 68,623
|
|
01-13-2019, 08:09 PM | #8 |
BAMF SS
|
Depends on what you are trying to do... the ground in the engine bay that was mentioned is a chassis ground, and is not the battery ground. If you are trying to jump or put a tender on the car, the stud can be used. If you are trying to disconnect the negative terminal, you need to remove the one in the trunk
__________________
2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance
Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph. |
01-14-2019, 12:11 PM | #9 |
Drives: 17' Turbocharged Camaro Join Date: Jan 2019
Location: Florida
Posts: 24
|
Thank you guys
|
03-01-2024, 09:06 PM | #10 |
Drives: 2017 ss camaro , Nightfall Gray Join Date: Mar 2018
Location: Uvalde tx
Posts: 2
|
Ground post #3
In reference to the Manual that was shared , ground post #3 . How would you go about replacing that nutsert. Seems to have it with a bolt . And well I need to replace it :,)
|
|
|
Post Reply
|
|
|