Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
  
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetics and Lighting Modification Discussions
Reload this Page ZL1 style dead pedal
Homepage Garage Wiki Register Community Calendar Today's Posts Search


Reply
Page 7 of 9 « First 3456 7 89
 
Thread Tools
Old 06-29-2015, 08:22 AM   #85
Cincy10SSRS

 
Cincy10SSRS's Avatar
 
Drives: 2010 2SS RS M6
Join Date: Mar 2011
Location: Cincinnati area
Posts: 1,522
Quote:
Originally Posted by hammdo View Post
You say in that post that you used some of a mouse pad in the install. What for/how? Also, of course to each his own, but I'm not sure why some people don't seem to want to use the screws for the install. I did for a similar pedal when I had my 2010 SS M6. No biggie at all drilling four small holes in the black plastic of the existing "dead pedal" and IMHO the screws make it look more complete (no empty screw holes).
__________________
Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.
Cincy10SSRS is offline   Reply With Quote
Old 06-29-2015, 08:50 AM   #86
Cincy10SSRS

 
Cincy10SSRS's Avatar
 
Drives: 2010 2SS RS M6
Join Date: Mar 2011
Location: Cincinnati area
Posts: 1,522
All the pedals are shipping today USPS 2-day priority mail but I just got this message from the Ultimate Pedal guy. Whoever this is needs to let him know your shipping address.

Quote:
We're missing a delivery address for one of the group buy members (initials are ER).

We have e-mailed him twice with no reply.

Would you mind posting a request on the forum?
__________________
Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.
Cincy10SSRS is offline   Reply With Quote
Old 06-29-2015, 03:34 PM   #87
krisprz2010camaross

 
krisprz2010camaross's Avatar
 
Drives: 2010 Camaro 2ss/Rs Transformers
Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
Quote:
Originally Posted by Cincy10SSRS View Post
You say in that post that you used some of a mouse pad in the install. What for/how? Also, of course to each his own, but I'm not sure why some people don't seem to want to use the screws for the install. I did for a similar pedal when I had my 2010 SS M6. No biggie at all drilling four small holes in the black plastic of the existing "dead pedal" and IMHO the screws make it look more complete (no empty screw holes).


Do you have any pics of the pedal on with the screws? And how long did it it take to install?
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage
LS3 conversion
Vararam intake(tune model)
Kooks LT headers & cats delete
Corsa ZL1 3" exhaust
RedBarn Racing Tune
CMS Stage 3 Cam
AFR CNC ported heads
MSD Spark plug wires
LNC-2000 Launch controller
NGK TR6 Spark Plugs
1le strut tower brace-TPIS spacers
Nick Williams 102mm throttle body
Fast lsxr 102 intake manifold
Slp 25% UDP
Katech Tensioner Pulley
Circle D 3600-3700 multi disk Stall
GM 3.91 gears
DDS carbon fiber driveshaft
ZL1 fuel pump & injectors
Flex fuel sensor(91/E85)
https://wheelwell.com/kris-perez
krisprz2010camaross is offline   Reply With Quote
Old 06-29-2015, 04:39 PM   #88
Cincy10SSRS

 
Cincy10SSRS's Avatar
 
Drives: 2010 2SS RS M6
Join Date: Mar 2011
Location: Cincinnati area
Posts: 1,522
Quote:
Originally Posted by krisprz2010camaross View Post
Do you have any pics of the pedal on with the screws? And how long did it it take to install?
Wow, I have a crap load of pics of stuff on that car and just went thru most all of them on Photobucket and was kind of surprised I DIDN'T have any of that. It was super easy and quick though. Just laid the pedal in place, marked the screw holes with a marker, drilled holes with the appropriate size bit (don't remember but pretty small), screwed pedal in place and that was it. Whole thing probably took 15 minutes or less. Pretty sure I'll do the same thing with this one.
__________________
Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.
Cincy10SSRS is offline   Reply With Quote
Old 06-29-2015, 05:22 PM   #89
hammdo
'It's an experiment'
 
hammdo's Avatar
 
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE
Join Date: May 2014
Location: Dallas TX
Posts: 8,693
Mouse pad is so the background does not show the underlying plastic. Just cut to shape to cover the horizontal openings and super glue. Then, I used Velcro to hold it down. You'll see what I mean when you test fit it as how the pedal on the carpet shows through.

I'm going to use smaller screw heads that will just fit. I did not want to make holes in my carpet.

-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari
See My Build: http://www.camaro5.com/forums/showthread.php?t=385577
hammdo is offline   Reply With Quote
Old 06-29-2015, 05:28 PM   #90
hammdo
'It's an experiment'
 
hammdo's Avatar
 
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE
Join Date: May 2014
Location: Dallas TX
Posts: 8,693
Quote:
Originally Posted by krisprz2010camaross View Post
How did you install yours? I don't think I wanna just use 3M tape to keep it in place, maybe something stronger.
Velcro on the backside. I bought small screws that just fit in the holes. I'll superglue those in just for show...

-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari
See My Build: http://www.camaro5.com/forums/showthread.php?t=385577
hammdo is offline   Reply With Quote
Old 06-29-2015, 06:46 PM   #91
hammdo
'It's an experiment'
 
hammdo's Avatar
 
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE
Join Date: May 2014
Location: Dallas TX
Posts: 8,693
Dead pedal with screw(heads only)...

Before:
http://www.camaro5.com/forums/showpo...&postcount=449

After:
http://www.camaro5.com/forums/showpo...&postcount=449

-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari
See My Build: http://www.camaro5.com/forums/showthread.php?t=385577
Last edited by hammdo; 06-29-2015 at 07:09 PM.
hammdo is offline   Reply With Quote
Old 06-29-2015, 09:04 PM   #92
Shark72

 
Shark72's Avatar
 
Drives: '16 Z06/Z07, '15 Z/28,1972 Stingray
Join Date: Feb 2013
Location: Drivers Seat
Posts: 837
I liked the pedals so much....I just bought the car!
__________________
2015 Z/28 #642 Black Bad Ass
Shark72 is offline   Reply With Quote
Old 06-30-2015, 08:40 AM   #93
hammdo
'It's an experiment'
 
hammdo's Avatar
 
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE
Join Date: May 2014
Location: Dallas TX
Posts: 8,693
Quote:
Originally Posted by Shark72 View Post
I liked the pedals so much....I just bought the car!
I like the way you think!

-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari
See My Build: http://www.camaro5.com/forums/showthread.php?t=385577
hammdo is offline   Reply With Quote
Old 07-01-2015, 08:26 AM   #94
Cincy10SSRS

 
Cincy10SSRS's Avatar
 
Drives: 2010 2SS RS M6
Join Date: Mar 2011
Location: Cincinnati area
Posts: 1,522
Anyone received theirs yet? USPS tracking says mine is out for delivery yet today.
UPDATE: USPS tracking says mine was just delivered at my mailbox; can't wait to get home after work.
__________________
Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.
Last edited by Cincy10SSRS; 07-01-2015 at 08:43 AM.
Cincy10SSRS is offline   Reply With Quote
Old 07-01-2015, 04:52 PM   #95
ZWA SS
BowtieBelle's SS
 
ZWA SS's Avatar
 
Drives: 2010 Camaro SS
Join Date: Jan 2012
Location: Perry, ok
Posts: 1,074
Yes mine came today!!
Deciding if I want to back them or just use as is and screw on
ZWA SS is offline   Reply With Quote
Old 07-01-2015, 07:43 PM   #96
Cincy10SSRS

 
Cincy10SSRS's Avatar
 
Drives: 2010 2SS RS M6
Join Date: Mar 2011
Location: Cincinnati area
Posts: 1,522
Got mine today also. It looks very nice but maybe a tad bigger than I expected. I think I'll take the time to cut out and place some material (hard foam rubber or whatnot) between the slots.
__________________
Traded-in car: K&N Typhoon intake, JBA Shorty headers, Solo mid-pipes/hi-flow cats, GMPP Track Pack axle-back, Vmax ported TB, Billet Custom catch can, billet tensioner pulley, Hines Hex Vents, Z/TA rear spoiler, ProCustom headlight covers, Drake black/riveted quarter window covers, GM satin fuel door, chrome and brushed caps/covers under the hood, EmblemPros underhood bowtie & fuel rail "Camaro" plates, chrome "SS" door kick-panels, chrome trunk latch plate & strut rods, Street Scene lower grille ducts w/LED lights, front bowtie-delete, Yates Performance pedals, 35% tint, etc.
Cincy10SSRS is offline   Reply With Quote
Old 07-01-2015, 07:55 PM   #97
ZWA SS
BowtieBelle's SS
 
ZWA SS's Avatar
 
Drives: 2010 Camaro SS
Join Date: Jan 2012
Location: Perry, ok
Posts: 1,074
I just screwed mine in.
ZWA SS is offline   Reply With Quote
Old 07-01-2015, 07:56 PM   #98
ZWA SS
BowtieBelle's SS
 
ZWA SS's Avatar
 
Drives: 2010 Camaro SS
Join Date: Jan 2012
Location: Perry, ok
Posts: 1,074
.
Name: Floor.jpg Views: 274 Size: 24.7 KB
ZWA SS is offline   Reply With Quote
 
Reply
Page 7 of 9 « First 3456 7 89

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:06 PM.

Contact Us - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - Archive - Privacy Statement - Terms of Service / DMCA Policy - Top

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.