Side Markers that are cheaper than DD and Oracle and look just as good - Page 35

RLem619 · 04-25-2019, 07:08 PM

Just ordered the side markers, plate light, and smoked rear reflector kit. Now the wait...

camex · 04-26-2019, 12:39 AM

Mine over year now, still bright and looks like new.
I'm really happy with this.

JWMotoring · 04-26-2019, 07:19 AM

Quote:

Originally Posted by Yanniz

Got them installed, they look 👍

looks great thanks for taking the time to post the pic!

Quote:

Originally Posted by RLem619

Just ordered the side markers, plate light, and smoked rear reflector kit. Now the wait...

shipping those right now

Quote:

Originally Posted by camex

Mine over year now, still bright and looks like new.
I'm really happy with this.

Same here. Thanks again!

Chris C 1SS 1LE · 04-26-2019, 09:00 AM

Bought for my neighbors bday. Arrived. He loves them tango!

Luis19SS · 04-29-2019, 10:19 PM

JWMotoring · 05-01-2019, 10:24 AM

Looks great on the 19. thanks!

JWMotoring · 05-01-2019, 02:02 PM

Quote:

Originally Posted by Chris C 1SS 1LE

Bought for my neighbors bday. Arrived. He loves them tango!

thanks buddy

Grumpy1 · 05-01-2019, 02:24 PM

Quote:

Originally Posted by camex

Mine over year now, still bright and looks like new.
I'm really happy with this.

Same here........

jmhinkle · 05-01-2019, 02:29 PM

Finally got the picture with the sides done.

RLem619 · 05-01-2019, 10:07 PM

Thanks for the fast shipping JW Motorsports! Threw these on in the rain and only took 15-20 minutes. Very bright and nice quality. Unfortunately, the rear deflectors look to be too much trouble to install.

jmhinkle · 05-01-2019, 11:51 PM

Quote:

Originally Posted by RLem619

Thanks for the fast shipping JW Motorsports! Threw these on in the rain and only took 15-20 minutes. Very bright and nice quality. Unfortunately, the rear deflectors look to be too much trouble to install.

Are you talking about the bottom rear end reflectors? If so, those are a nightmare. I replaced mine with the Helix LED models this weekend and could not get to the screw like Phastek shows in the video. I had to notch the bumper metal just above the inner exhaust tip to get the screw in and out. Wiring was simple since I had the tailights out for swaps to the Next Gen smoked with amber signal version.

RLem619 · 05-02-2019, 02:05 AM

Yes, I heard they were a PITA. You think the 18's were hard, looks like the 2019's need a complete bumper cover removal.

jmhinkle · 05-02-2019, 02:25 AM

Quote:

Originally Posted by RLem619

Yes, I heard they were a PITA. You think the 18's were hard, looks like the 2019's need a complete bumper cover removal.

The 19 will be the same as far as access to that screw. The metal of the bumper reinforcement, if you look above the exhaust tips from under the car at the inside of the bumper, just needs a 1/2" x 3/4" notch cut out directly above the inner tips, then the job is pretty easy. It helps to have a 3rd hand to guide the new light/reflector back onto the screw as you hold it in from behind with the screwdriver.

red_johnny · 05-02-2019, 09:36 AM

I have to update. Had issues but JWMotoring took care of me. Got the new ones installed and I made sure every connector was secured into the housing of the reflector. I think that is why some people have issues. If ANY water gets into that housing through the plug hole its going to eventually rust out the connector and cause problems. Just be sure its seated correctly. Maybe even check on them now and again.

04-25-2019, 07:08 PM	#477
RLem619 Drives: 2019 Camaro 2SS A10 Join Date: Feb 2019 Location: San Diego Posts: 207	Just ordered the side markers, plate light, and smoked rear reflector kit. Now the wait... __________________ 2019 2SS: A10, Satin Steel Gray Metallic, MRC, Nav.

04-26-2019, 09:00 AM	#480
Chris C 1SS 1LE Drives: 2017 1LE Join Date: Nov 2017 Location: Brooks, GA Posts: 697	Bought for my neighbors bday. Arrived. He loves them tango! __________________ '17 Bright Yellow 1LE. PDR, STB, !CAGS Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube

04-29-2019, 10:19 PM	#481
Luis19SS Drives: 2019 SS A10 Join Date: Mar 2015 Location: Arizona Posts: 487	Attached Images __________________ Black 2019 SS A10, MBRP Exhuast, Soler performance Ported Throttlebody, Cold Air Inductions CAI, BMR equipped, Stance SFO7 on nitto NT555G2 tires, Limited Edition White Racing Seats, ZL1 1LE Splitter, Carbon Sideskirts, Gorilla Splitters areo kit, Next Gen Speed Diffuser, JWmotorsports LED side markers

05-01-2019, 10:07 PM	#486
RLem619 Drives: 2019 Camaro 2SS A10 Join Date: Feb 2019 Location: San Diego Posts: 207	Thanks for the fast shipping JW Motorsports! Threw these on in the rain and only took 15-20 minutes. Very bright and nice quality. Unfortunately, the rear deflectors look to be too much trouble to install. Attached Images __________________ 2019 2SS: A10, Satin Steel Gray Metallic, MRC, Nav.

05-02-2019, 02:05 AM	#488
RLem619 Drives: 2019 Camaro 2SS A10 Join Date: Feb 2019 Location: San Diego Posts: 207	Yes, I heard they were a PITA. You think the 18's were hard, looks like the 2019's need a complete bumper cover removal. __________________ 2019 2SS: A10, Satin Steel Gray Metallic, MRC, Nav.

04-26-2019, 12:39 AM	#478
camex Drives: Sold Join Date: Sep 2016 Location: 555.63.389738 Posts: 336	Mine over year now, still bright and looks like new. I'm really happy with this.

05-01-2019, 10:24 AM	#482
JWMotoring Drives: 2018 SS Hyper Blue Join Date: Sep 2010 Location: Oklahoma City Posts: 2,902	Looks great on the 19. thanks!

05-01-2019, 02:29 PM	#485
jmhinkle Drives: 2018 2SS Vert Join Date: Mar 2019 Location: OR Posts: 30 View My Garage	Finally got the picture with the sides done.

05-02-2019, 09:36 AM	#490
red_johnny Drives: 2016 Gray 2SS M6 Join Date: Jun 2012 Location: Hermitage, PA Posts: 753 View My Garage	I have to update. Had issues but JWMotoring took care of me. Got the new ones installed and I made sure every connector was secured into the housing of the reflector. I think that is why some people have issues. If ANY water gets into that housing through the plug hole its going to eventually rust out the connector and cause problems. Just be sure its seated correctly. Maybe even check on them now and again.

User Name		Remember Me?
Password