Camber plates finally!

Eric SS · 07-18-2017, 11:57 AM

In case people aren't checking out the vendor classifieds there is a company that now has some nice looking camber plates available and there is 10% off (That's $55) until the end of the month. Wanted to pass it on here so anyone that wants a set can pick them up.

http://www.camaro6.com/forums/showthread.php?t=501870

rotis · 07-18-2017, 01:28 PM

Nice looking plates, if I didn't already have plates I'd consider them. I'd like to be able to lower the car that 1/2" without moving my spring perch any further down the strut body.

Eric SS · 07-18-2017, 02:41 PM

Quote:

Originally Posted by rotis

Nice looking plates, if I didn't already have plates I'd consider them. I'd like to be able to lower the car that 1/2" without moving my spring perch any further down the strut body.

Hopefully they'll work well. I just ordered them

PolynesianPowerhouse · 07-21-2017, 02:03 PM

ordered as well!

OminouSS · 07-24-2017, 02:24 PM

Anybody receive theirs yet?

Eric SS · 07-24-2017, 02:38 PM

Quote:

Originally Posted by OminouSS

Anybody receive theirs yet?

Not yet. They were going to ship last week but I asked them to hold off until they could throw a couple decals in the box. Did you order yours?

OminouSS · 07-24-2017, 03:13 PM

Quote:

Originally Posted by Eric SS

Not yet. They were going to ship last week but I asked them to hold off until they could throw a couple decals in the box. Did you order yours?

Not yet. But I have my alignment appointment set!!!!

Hey...that reminds me: What are the rear numbers I should be looking for? I think I have -1.5 now. Was it Seans numbers that got posted before?

Eric SS · 07-24-2017, 04:35 PM

Quote:

Originally Posted by OminouSS

Not yet. But I have my alignment appointment set!!!!

Hey...that reminds me: What are the rear numbers I should be looking for? I think I have -1.5 now. Was it Seans numbers that got posted before?

The most I could get was -1.5 degrees without starting to get toe out. If you don't have BMR Toe rods just have the alignment shop give you the most they can and still get your toe setting correct. I have the toe rods sitting in my garage waiting to install when it cools down some since we're shut down for the summer here.

PolynesianPowerhouse · 07-24-2017, 06:48 PM

Quote:

Originally Posted by OminouSS

Anybody receive theirs yet?

I called on fruday before i ordered. Justin siad they would ship out monday if they didnt on friday.

Yall should get yours first due to location since ayll are west coast . Eager to get em as well!

seanblurr · 07-24-2017, 07:00 PM

Mine have yet to ship as well. In terms of rear camber, I forgot what I was able to get. But I believe we maxed it -1.7* before it affected my rear toe.

mbar · 07-26-2017, 07:39 AM

Quote:

Originally Posted by Eric SS

The most I could get was -1.5 degrees without starting to get toe out. If you don't have BMR Toe rods just have the alignment shop give you the most they can and still get your toe setting correct. I have the toe rods sitting in my garage waiting to install when it cools down some since we're shut down for the summer here.

I maxed at -1.4 rear with stock SS rims

PolynesianPowerhouse · 07-26-2017, 11:37 AM

Got the shipping info this mornin!

OminouSS · 07-26-2017, 11:17 PM

Quote:

Originally Posted by PolynesianPowerhouse

Got the shipping info this mornin!

As did I. I may not sleep tonight.

OminouSS · 07-26-2017, 11:21 PM

Quote:

Originally Posted by seanblurr

Mine have yet to ship as well. In terms of rear camber, I forgot what I was able to get. But I believe we maxed it -1.7* before it affected my rear toe.

You know I'm not driving for almost a full month. How am I going to go on vacation knowing my car is waiting with -3.5 on Pirelli DH? Maybe I'll leave the keys in the visor.

07-18-2017, 11:57 AM	#1
Eric SS #becauseracecar Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015 Location: Phoenix Posts: 2,959	Camber plates finally! In case people aren't checking out the vendor classifieds there is a company that now has some nice looking camber plates available and there is 10% off (That's $55) until the end of the month. Wanted to pass it on here so anyone that wants a set can pick them up. http://www.camaro6.com/forums/showthread.php?t=501870

07-21-2017, 02:03 PM	#4
PolynesianPowerhouse Big Samoan ina little car Drives: 2016 camaro Join Date: May 2014 Location: Tofiga Island Posts: 1,872	ordered as well! __________________ Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant

07-24-2017, 02:24 PM	#5
OminouSS Drives: Red Hot track candy Join Date: Oct 2009 Location: NorCal Posts: 1,092	Anybody receive theirs yet? __________________ Baby born 11/08/16. Left birthing place 11/25/16. Arrived home 12/6/16: '17 Red Hot ZL1. Stock.

07-24-2017, 07:00 PM	#10
seanblurr Drives: ZL1 1LE Join Date: Oct 2016 Location: California Posts: 1,297	Mine have yet to ship as well. In terms of rear camber, I forgot what I was able to get. But I believe we maxed it -1.7* before it affected my rear toe. __________________

07-26-2017, 11:37 AM	#12
PolynesianPowerhouse Big Samoan ina little car Drives: 2016 camaro Join Date: May 2014 Location: Tofiga Island Posts: 1,872	Got the shipping info this mornin! __________________ Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant

07-18-2017, 01:28 PM	#2
rotis Drives: 2019 ZL1 1LE Join Date: Sep 2010 Location: Bastrop, TX Posts: 438	Nice looking plates, if I didn't already have plates I'd consider them. I'd like to be able to lower the car that 1/2" without moving my spring perch any further down the strut body.

User Name		Remember Me?
Password