05-15-2016, 08:39 PM | #1 |
Drives: 2016 Camaro 2SS Join Date: Jan 2016
Location: Valley Village, CA
Posts: 636
|
Created our own Stripe Design...
This is just the discussion page, the purchase info page is here...
http://www.camaro6.com/forums/showth...14#post9094614 So, after making the 50th Anniv. Style stripes we wanted to do something new and different. I was always a fan of the way Barry's Speed Shop combined the Rally Stripes with the Yenko style stripes on their Camaro... So, we decided to take that CONCEPT and apply it to the 50th Ann. shape (we just really liked that shape lol). We carried them from the hood, over the roof (doing a 4" split the entire way so that it perfectly goes AROUND the antenna, no need to remove to install) and onto the trunk and spoiler. Unfortunately, picking a grey car (especially with a satin black hood lol) was a BAD idea to show off stripes lol! We did the silver pinstriping just so you could even see the shape (hence my car looks a little "Tron"ish lol) but I think this could look killer on... well pretty much any other color car lol! Anyways, just figured we'd do something different... Pictured is gloss black with silver accent stripes, HOWEVER, we have over 130 colors available (including carbon fiber) at NO EXTRA COST!!! So, if you want a different color combination just write in the NOTE section at check out what colors you would like (otherwise it will be shipped as seen). Thoughts? |
05-16-2016, 02:07 AM | #2 |
Drives: The Tumbler Join Date: Mar 2016
Location: California
Posts: 500
|
I freaking love it!!
|
05-16-2016, 09:21 AM | #3 |
The BEAST
Drives: '16 2SS, '89 Wife Join Date: May 2015
Location: Central Coast, CA
Posts: 2,034
|
nice... nice...
__________________
|
05-16-2016, 11:51 PM | #4 |
GM repeat offender...
Drives: 16 2SS Join Date: Dec 2014
Location: Grandview, Texas
Posts: 1,474
|
Id REALLY love to see this on a white SS. Im considering the SEMA single stripe setup, but I see possibility with this. Even though I can't actually SEE it!lol Please keep us updated. Im VERY interested!
__________________
'16 2SS, Summit White. A8. MRC. NPP.
Ordered:09/03/15. Received 12/22/15 INCOMING: ‘22 ZL1, Satin Steel. A10. PDR. Ordered: 03/02/22. |
05-17-2016, 10:12 PM | #5 |
Drives: 2017 Camaro 50th Anniversary 2SS Join Date: May 2016
Location: Austin, TX
Posts: 265
|
Any plans to offer something similar to the 50th Anniversary Camaro SS Pace Car at 100th Indianapolis 500? I particularly like the hood, trunk and blacked out rear end.
|
05-18-2016, 11:45 PM | #6 | |
Drives: 2016 Camaro 2SS Join Date: Jan 2016
Location: Valley Village, CA
Posts: 636
|
Quote:
http://6litereaterdesigns.com/store/...roducts_id=809 and this... http://6litereaterdesigns.com/store/...roducts_id=786 |
|
05-19-2016, 10:56 AM | #7 |
Drives: 2017 Camaro 50th Anniversary 2SS Join Date: May 2016
Location: Austin, TX
Posts: 265
|
Yes, I guess it's just hard to visualize this on a lighter color car. The photos you've posted do not due the due the strips justice.
http://www.autoblog.com/2016/04/19/r...-car-indy-500/ |
05-23-2016, 02:57 AM | #8 |
Drives: 2016 Camaro 2SS Join Date: Jan 2016
Location: Valley Village, CA
Posts: 636
|
|
06-26-2016, 03:25 PM | #9 |
Founder - Michigan FBody
Drives: 1994 Camaro LT1, 2012 Camaro 2SS/RS Join Date: Jun 2008
Location: New Haven, MI
Posts: 2,599
|
Looks good -- I just wish there was a proper "Heritage stripe" like the 5th gens had.
__________________
2012 Camaro 2SS/RS L99 - "Zooma"
1994 Camaro LT1 A4 - "Red Alert" - v6-to-LT1 Swapped Cruiser; Cammed, Stalled, Enjoyed "Gone But Not Forgotten" 2016 Camaro 1LT A8 - "Elmo" 2014 Camaro 1LT M6 - "Cherry Bomb" 2012 Camaro 1LS M6 - "Clifford" Michigan FBody Association http://www.mifbody.com/ |
06-26-2016, 03:55 PM | #10 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
is this the orange with gloss black stripping on this white Camaro? I tried to order but mem15 not working for discount.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
06-26-2016, 07:23 PM | #11 |
Drives: 2016 Camaro 2SS Join Date: Jan 2016
Location: Valley Village, CA
Posts: 636
|
That code was for the Memorial Day sale... E-mail me and I can do 10% off. mark@6LEDesigns.com
|
|
|
Post Reply
|
Thread Tools | |
|
|