LSA SUPERCHARGER. ported with 2.38 pulley. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

The Baron · 03-24-2014, 11:52 PM

I have a complete lsa 1.9 factory blower. Its been ported and has 2.38 pulley on it. I have a factory balancer and the blower belt acc needed. It also comes with fuel rail and a set of STOCK LSA INJECTORS. . These may or may not be enough for your car. This DOES NOT INCLUDE THE HEAT EXCHANGER or any coolant acc. This blower has 10,000 miles on it and has been serviced with a new snout bearing. It is ready to go.

Before you ask, no, I dont know what you will need FOR SURE to put this on your ls3, but you should only need to extend a few of your plugs ( tb, map, tps) but I HAVE NOT done it myself.

This blower will support 700wheel through a auto..

It will come with lid, coolant brick, portet snout and blower and front eng acc drive and a stock lsa balancer. With this setup it will produce 15#s of boost on a stock motor..
I put this blower on my car to move it around and to make sure the replaced bearing was functional. It can be heard or I can take a vid if desired.

3500$ or best offer.

DaFisch · 03-25-2014, 04:20 PM

What else is needed to install? Interested

tc Bosnian · 03-25-2014, 08:18 PM

Quote:

Originally Posted by DaFisch

What else is needed to install? Interested

jrhagen · 03-25-2014, 08:20 PM

Quote:

Originally Posted by tc Bosnian

DaFisch · 03-25-2014, 10:08 PM

My bad, reread

The Baron · 04-01-2014, 02:22 PM

SOLD

03-24-2014, 11:52 PM	#1
The Baron Drives: 2013 zl1 Join Date: Nov 2012 Location: st louis Posts: 838	LSA SUPERCHARGER. ported with 2.38 pulley. I have a complete lsa 1.9 factory blower. Its been ported and has 2.38 pulley on it. I have a factory balancer and the blower belt acc needed. It also comes with fuel rail and a set of STOCK LSA INJECTORS. . These may or may not be enough for your car. This DOES NOT INCLUDE THE HEAT EXCHANGER or any coolant acc. This blower has 10,000 miles on it and has been serviced with a new snout bearing. It is ready to go. Before you ask, no, I dont know what you will need FOR SURE to put this on your ls3, but you should only need to extend a few of your plugs ( tb, map, tps) but I HAVE NOT done it myself. This blower will support 700wheel through a auto.. It will come with lid, coolant brick, portet snout and blower and front eng acc drive and a stock lsa balancer. With this setup it will produce 15#s of boost on a stock motor.. I put this blower on my car to move it around and to make sure the replaced bearing was functional. It can be heard or I can take a vid if desired. 3500$ or best offer. __________________ 2011 cts-v coupe (pinky) wifes car.. ls9 cam c.a.i. 11.44 2007 corvette vert ..retired.. 2013 zl1 stock blower stock ci 20" wheels 10.36 135...so far.. Last edited by The Baron; 03-25-2014 at 12:23 AM.

04-01-2014, 02:22 PM	#6
The Baron Drives: 2013 zl1 Join Date: Nov 2012 Location: st louis Posts: 838	SOLD __________________ 2011 cts-v coupe (pinky) wifes car.. ls9 cam c.a.i. 11.44 2007 corvette vert ..retired.. 2013 zl1 stock blower stock ci 20" wheels 10.36 135...so far..

03-25-2014, 04:20 PM	#2
DaFisch Master Amateur Mechanic Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013 Location: South Barrington, IL Posts: 1,720	What else is needed to install? Interested

03-25-2014, 10:08 PM	#5
DaFisch Master Amateur Mechanic Drives: Victory Red 2011 2SS/RS Join Date: Jan 2013 Location: South Barrington, IL Posts: 1,720	My bad, reread