Club F1FTY - Page 928

Kaizer_911 · 08-20-2019, 03:23 PM

Quote:

Originally Posted by KyBoy

Yeah, I only had trouble with getting the dead pedal to stick. I think I was using too much glue. Waaaaay better deal than the GM version and Sean includes the dead pedal, which is my reason for getting them.

Heath

Which gorilla glue did you use? And yeah sounds like I might need to invest in a set.

Did you coat them? Or use anything special to clean them?

Sent from my iPhone using Tapatalk

KyBoy · 08-20-2019, 04:16 PM

Quote:

Originally Posted by Kaizer_911

Which gorilla glue did you use? And yeah sounds like I might need to invest in a set.

Did you coat them? Or use anything special to clean them?

Sent from my iPhone using Tapatalk

No, just gorilla super glue. I didn't coat or clean them. That may have been my mistake. It's on now though.

Heath

Kaizer_911 · 08-20-2019, 05:24 PM

Quote:

Originally Posted by KyBoy

No, just gorilla super glue. I didn't coat or clean them. That may have been my mistake. It's on now though.

Heath

Noted. And on is on. That’s all that matters lol.

Sent from my iPhone using Tapatalk

lcd550 · 08-20-2019, 11:48 PM

Quote:

Originally Posted by KyBoy

No, just gorilla super glue. I didn't coat or clean them. That may have been my mistake. It's on now though.

Heath

Bought the dead pedal inlay from Sean as well. Took me a couple of times to get it right. The first time I used Loctite 406 and it didn't work well as the glue runs! Ended up using Gorilla Super Glue Gel...found out by surfing the internet that it doesn't run even in a vertical position.

Kaizer_911 · 08-22-2019, 01:16 PM

Anyone ever ordered a spare from this company?

www.modernspare.com

Sent from my iPhone using Tapatalk

KyBoy · 08-22-2019, 02:02 PM

Quote:

Originally Posted by Kaizer_911

Anyone ever ordered a spare from this company?

www.modernspare.com

Sent from my iPhone using Tapatalk

Not me...is there a space for it?

Heath

Kaizer_911 · 08-22-2019, 03:02 PM

Quote:

Originally Posted by KyBoy

Not me...is there a space for it?

Heath

Under the floor there is a tire sized hole/area if I recall correctly. Not sure if this would fit there or not. Otherwise it would take up most of the “spacious” trunk space we already have.

Sent from my iPhone using Tapatalk

Homer2 · 08-22-2019, 07:41 PM

Im gonna think it lives in the good space - and most of it. Don't think the well will handle it all

misterbill77 · 08-22-2019, 08:06 PM

Quote:

Originally Posted by Kaizer_911

Noted. And on is on. That’s all that matters lol.

Sent from my iPhone using Tapatalk

It’s a great quality product. Just be careful with the edges if you decide to clean them ahead of the install. Dem puppies is razor sharp...

Quote:

Originally Posted by KyBoy

No, just gorilla super glue. I didn't coat or clean them. That may have been my mistake. It's on now though.

Heath

Quote:

Originally Posted by lcd550

Bought the dead pedal inlay from Sean as well. Took me a couple of times to get it right. The first time I used Loctite 406 and it didn't work well as the glue runs! Ended up using Gorilla Super Glue Gel...found out by surfing the internet that it doesn't run even in a vertical position.

Based on y’alls recommendation, Amazon is sending me some Super Gorilla Snot... :-)

Billabongi · 08-23-2019, 10:05 PM

Anybody here play Fantasy Football and want to join a 10 Team Keeper League? A guy dropped out and I need to replace him. Draft is this Sunday at 1:00 p.m. you have the choice (but don't have to) keep up to 3 players year over year.

Let me know if interested

AKI.SILES · 08-24-2019, 03:06 AM

Good morning to everybody.
I have a doubt.
I have purchased the original Chevrolet Air Performance Intake kit, and in the instructions there are indications that the vehicle must be reprogrammed for this kit, and even an official service code which includes the installation by Chevrolet.
Do you know if reprogramming is necessary?.
Regards

HDRDTD · 08-24-2019, 04:50 AM

"required', probably not, but recommended to get the best performance possible with that optional intake.

No reason not to get the re-programming since the cost of it is included in the price of the intake, it's done at your local Chevrolet dealer, and has no effect on your warranty.

KyBoy · 08-24-2019, 04:56 AM

Quote:

Originally Posted by AKI.SILES

Good morning to everybody.

I have a doubt.

I have purchased the original Chevrolet Air Performance Intake kit, and in the instructions there are indications that the vehicle must be reprogrammed for this kit, and even an official service code which includes the installation by Chevrolet.

Do you know if reprogramming is necessary?.

Regards

Al Oppenheiser told me that the "re-tune" is to keep the temperature at the right levels.

Heath

Kaizer_911 · 08-24-2019, 07:38 AM

Quote:

Originally Posted by AKI.SILES

Good morning to everybody.

I have a doubt.

I have purchased the original Chevrolet Air Performance Intake kit, and in the instructions there are indications that the vehicle must be reprogrammed for this kit, and even an official service code which includes the installation by Chevrolet.

Do you know if reprogramming is necessary?.

Regards

Quote:

Originally Posted by KyBoy

Al Oppenheiser told me that the "re-tune" is to keep the temperature at the right levels.

Heath

The tune is highly suggested. Like Heath said, I was there when he told Heath, it helps keep the temps right. It adjusts the MAF table.

Sent from my iPhone using Tapatalk

08-22-2019, 01:16 PM	#12983
Kaizer_911 Drives: 2017 2SS 50th Anniversary Edition Join Date: Aug 2011 Location: Memphis, TN Posts: 7,378 View My Garage	Anyone ever ordered a spare from this company? www.modernspare.com Sent from my iPhone using Tapatalk __________________ 2017 50th Anniversary Edition 2SS - #TeamBeckyD 1100 - 04/29/16 \| 2000 - 05/03/16 3000 - 05/04/16 \| TPW 6/6 - 05/09/16 3100 - 05/25/16 \| 3300 - 05/28/16 3400 - 05/31/16 \| 3800 - 06/14/16, #125 Built! 4200 - 06/29/16 \| 5000 - 06/29/16 6000 - 07/08/16 \| Club F1FTY

08-22-2019, 07:41 PM	#12986
Homer2 Drives: 50th Anni.. coming home 11/01 Join Date: Jul 2014 Location: Toronto. Ontario Posts: 1,636	Im gonna think it lives in the good space - and most of it. Don't think the well will handle it all __________________ ##################### Built Sept 16/2016 - #2681 of 5955. She came home with me 11/01/16. 50th Anni, 2SS, A8, NPP, NGM Rock Guards, Footwell Lighting, Black Bow Ties, Street Warrior Rotors and Pads, Ceramic Pro, 3M PPF, Oracle Ghosted Side Markers, Kooks 2" headers w/hi flow cats. GPI Stage 1 Cam installed at 305,000 kms.

08-23-2019, 10:05 PM	#12988
Billabongi Drives: '17 SS 50th Camaro Join Date: Apr 2012 Location: Tampa, Florida Posts: 921	Anybody here play Fantasy Football and want to join a 10 Team Keeper League? A guy dropped out and I need to replace him. Draft is this Sunday at 1:00 p.m. you have the choice (but don't have to) keep up to 3 players year over year. Let me know if interested __________________ 2017 50th Anniversary 2LT\RS - #1583 SOLD 2017 50th Anniversary 2SS - #3410

08-24-2019, 03:06 AM	#12989
AKI.SILES Drives: 2SS FIFTY Join Date: Oct 2018 Location: ALBACETE/SILES, ESPAÑA Posts: 265	Good morning to everybody. I have a doubt. I have purchased the original Chevrolet Air Performance Intake kit, and in the instructions there are indications that the vehicle must be reprogrammed for this kit, and even an official service code which includes the installation by Chevrolet. Do you know if reprogramming is necessary?. Regards __________________ I ONLY FOLLOW GOD. PRE “LA MAKINA”

08-24-2019, 04:50 AM	#12990
HDRDTD Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011 Location: Trenton, Michigan Posts: 7,047	"required', probably not, but recommended to get the best performance possible with that optional intake. No reason not to get the re-programming since the cost of it is included in the price of the intake, it's done at your local Chevrolet dealer, and has no effect on your warranty.

User Name		Remember Me?
Password