C7Carbon | Time Attack Front Fenders 3D developed >>> Input Welcome!!!<<<

C7 Carbon · 08-05-2019, 08:57 PM

Hi Everyone!
We are currently working on a wide body front fender with the most aggressive setup yet, which will be perfect for time attack applications, track and aggressive stance.

Bellow are a few pics of the latest updates on this project, we are open to suggestions and we can definitely do our best to integrate any feature you would like to see on the fenders...

We'd love to hear from you and see what would be the best choice that will suite your needs, let's make it happen!

Tay · 08-05-2019, 10:36 PM

Quote:

Originally Posted by C7 Carbon

Hi Everyone!
We are currently working on a wide body front fender with the most aggressive setup yet, which will be perfect for time attack applications, track and aggressive stance.

Bellow are a few pics of the latest updates on this project, we are open to suggestions and we can definitely do our best to integrate any feature you would like to see on the fenders...

We'd love to hear from you and see what would be the best choice that will suite your needs, let's make it happen!

I think they look great.

I mentioned this in your other fender thread, but I would like to see another version that stays wide all the way to the door creating an opening which would let air/pressure out from there fender. See photos:

WallsAndFoundations · 08-06-2019, 02:10 AM

Quote:

Originally Posted by C7 Carbon

Hi Everyone!
We are currently working on a wide body front fender with the most aggressive setup yet, which will be perfect for time attack applications, track and aggressive stance.

Bellow are a few pics of the latest updates on this project, we are open to suggestions and we can definitely do our best to integrate any feature you would like to see on the fenders...

We'd love to hear from you and see what would be the best choice that will suite your needs, let's make it happen!

How wide will these be? And will they be available in addition to something for a wider rear? I'm running a squared 19x10.5 wheel setup and have the same amount of flushness front:rear which leads me to believe GM made both fenders with similar clearance. I worry that a mad wide front fender setup would make the car look dorky and not allow for a proper wheel/tire setup if only the front is much wider.

Tay · 08-06-2019, 07:05 PM

Quote:

Originally Posted by WallsAndFoundations

How wide will these be? And will they be available in addition to something for a wider rear? I'm running a squared 19x10.5 wheel setup and have the same amount of flushness front:rear which leads me to believe GM made both fenders with similar clearance. I worry that a mad wide front fender setup would make the car look dorky and not allow for a proper wheel/tire setup if only the front is much wider.

I think it will be fine. You can already run 19x12 under the stock rear fenders. The limiting factor was the front and not the rear.

So you should be able to run with an 11" or 12" in the front with these new fenders. That seems like plenty.

C7 Carbon · 08-08-2019, 07:42 PM

Thanks for your input everyone, we are taking notes!

C7 Carbon · 08-13-2019, 06:38 PM

PMs replied

C7 Carbon · 08-16-2019, 06:09 PM

Updates coming soon!

USAFS197 · 08-20-2019, 07:50 PM

I don’t mind the fenders but, I really, really don’t like the abrupt cut off of the fender arch seen in your third picture. That is seen far too often in those gaudy tacked on fender flares and screams rice. On top of that, our poor quarter panels and doors are going to get obliterated without some means of blocking the incoming rocks and random crap our tires will pick up on the road or track. Please consider a design that either addresses this concern or at the very least, completes the arch.

C7 Carbon · 08-22-2019, 04:27 PM

Thank you for the input, we greatly appreciate it!

DDFast · 08-23-2019, 06:44 AM

any work on zl1's

chaospiece · 08-23-2019, 09:37 AM

A vent would look better than that abrupt cut. Looks like add on widebody kit like that.

ZLBlue · 09-21-2019, 07:21 PM

Has there been an update yet on these?

C7 Carbon · 09-29-2019, 12:11 PM

Hey guys, sorry for the slow updates with this project. We are hoping to have a few more pictures to post this coming week.

C7 Carbon · 11-11-2019, 01:12 PM

Just a quick update.. We are just printing off the opposite side lower bumper extensions now and hope to have some new pictures later this week

08-05-2019, 08:57 PM	#1
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	C7Carbon \| Time Attack Front Fenders 3D developed >>> Input Welcome!!!<<< Hi Everyone! We are currently working on a wide body front fender with the most aggressive setup yet, which will be perfect for time attack applications, track and aggressive stance. Bellow are a few pics of the latest updates on this project, we are open to suggestions and we can definitely do our best to integrate any feature you would like to see on the fenders... We'd love to hear from you and see what would be the best choice that will suite your needs, let's make it happen! Last edited by C7 Carbon; 12-28-2019 at 12:00 PM.

08-20-2019, 07:50 PM	#8
USAFS197 Drives: 2018 Audi TT RS Join Date: Jan 2014 Location: Navarre, Florida Posts: 1,915	I don’t mind the fenders but, I really, really don’t like the abrupt cut off of the fender arch seen in your third picture. That is seen far too often in those gaudy tacked on fender flares and screams rice. On top of that, our poor quarter panels and doors are going to get obliterated without some means of blocking the incoming rocks and random crap our tires will pick up on the road or track. Please consider a design that either addresses this concern or at the very least, completes the arch. __________________ 2018 Audi TT ▊RS 2.4X 0-60, 1.6X 60', 120+mph 1/8th, 4.XX 60-130, 150+mph traps on 255/35/18 R888R tires on the street (unprepped). 2019 Audi RS3 About as fast as the TT RS 2019 Camaro ZL1 1LE Sold 2018 Camaro SS 1LE Sold 2019 Corvette Z06 Sold 2021 Charger Hellcat Redeye Widebody Sold

09-21-2019, 07:21 PM	#12
ZLBlue Drives: 18' RS Join Date: Sep 2018 Location: Seattle Posts: 7	Has there been an update yet on these? __________________ Hello

08-08-2019, 07:42 PM	#5
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Thanks for your input everyone, we are taking notes!

08-13-2019, 06:38 PM	#6
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	PMs replied

08-16-2019, 06:09 PM	#7
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Updates coming soon!

08-22-2019, 04:27 PM	#9
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Thank you for the input, we greatly appreciate it!

08-23-2019, 06:44 AM	#10
DDFast Drives: ZL1 1LE Join Date: Apr 2019 Location: South Carolina Posts: 37	any work on zl1's

08-23-2019, 09:37 AM	#11
chaospiece Drives: 2018 SS, 2016 GT Join Date: Mar 2018 Location: California Posts: 210	A vent would look better than that abrupt cut. Looks like add on widebody kit like that.

09-29-2019, 12:11 PM	#13
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Hey guys, sorry for the slow updates with this project. We are hoping to have a few more pictures to post this coming week.

11-11-2019, 01:12 PM	#14
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Just a quick update.. We are just printing off the opposite side lower bumper extensions now and hope to have some new pictures later this week

User Name		Remember Me?
Password