[mjk3888]

Originally Posted by camaroJD

I'm excited! Hopefully an earlier adopter discount? Haha

Any ideas where a non-permanent switch could be mounted if some of us wanted that option?

I wonder how hard it would be to run a round switch in place of the power socket near the shifter. I always have my phone hooked up via the usb so the socket is never used. a round switch there would be a pretty clean and hidden install, but I imagine it would require long wires for routing.

[madscotsman]

Originally Posted by mjk3888

I wonder how hard it would be to run a round switch in place of the power socket near the shifter. I always have my phone hooked up via the usb so the socket is never used. a round switch there would be a pretty clean and hidden install, but I imagine it would require long wires for routing.

Yeah, I HATE the placement of that socket, esp with a manual. I've never used it. Why would you have it top mounted in the middle of the center column, to highlight the beautiful, bulky power-cord blocks you plug into it, or just to ensure you can hit it with your hand every time you shift or have to move the gear selector?!?! Seems like a last minute afterthought by the design department at GM IMO.

[2SSRS@Gen5diy]

Originally Posted by camaroJD

I'm excited! Hopefully an earlier adopter discount? Haha

Any ideas where a non-permanent switch could be mounted if some of us wanted that option?

Yes there is, go to this link https://www.camaro6.com/forums/showt...3#post10494293

Originally Posted by camaroJD

I'm just concerned for warranty purposes, you never know. I don't like to give dealers a reason.

Does anyone know the part number for that plastic piece we would be drilling into? The best solution might be to have a back if it's cheap.

We can make it with a remote control, but it will cost more.

Originally Posted by mjk3888

I'm down for drilling to mount the switches. Looks like 2 individual switches. 1 for vent and 1 for heat I assume. I assume its a simple on off instead of 3 level switches like the OEM heated/vented seats. Correct?

Originally Posted by GTSLOW

I was thinking driver and passenger side vents? Were they even going to include the heating elements?

Originally Posted by camaroJD

I'm pretty sure the elements are already inside the seat. We are just missing the controller for both functions.

Yes they are.

[2SSRS@Gen5diy]

Guys did both seats in my 19 2.0T 1LE, test drove the car to see if it all works and yes it works as good as my ZLE car, we order in all the parts needed to make 50 sets, and will start on them end of next week.

[kjchristopher]

Originally Posted by 2SSRS@Gen5diy

Guys did both seats in my 19 2.0T 1LE, test drove the car to see if it all works and yes it works as good as my ZLE car, we order in all the parts needed to make 50 sets, and will start on them end of next week.

Pre-order available or are you selling after built?

[GTSLOW]

Awesome!

[2SSRS@Gen5diy]

Originally Posted by kjchristopher

Pre-order available or are you selling after built?

For Pre-orders go here. https://www.camaro6.com/forums/showthread.php?t=552402

[JoeC427]

I'm in for both

[ScaryFatKidGT]

Originally Posted by 2SSRS@Gen5diy

Guys did both seats in my 19 2.0T 1LE, test drove the car to see if it all works and yes it works as good as my ZLE car, we order in all the parts needed to make 50 sets, and will start on them end of next week.

[GTSLOW]

Originally Posted by 2SSRS@Gen5diy

For Pre-orders go here. https://www.camaro6.com/forums/showthread.php?t=552402

Thank you!

Glad to hear it was just the cooling fans after all.

[cmeJATT]

waiting for 2nd version to be released!!!!!! cannot wait for the heat + cooling harness!

[cdrptrks]

Does anyone know the correct torque for reinstalling the seat bolts after the seat cooling harness is installed and whether or not loctite should be used?

[camaroJD]

Got mine today. I don't think I'll be able to install this weekend. I still am considering an alternate/non-permanent switch position if anyone has any ideas!

[NeverDie]

Originally Posted by cmeJATT

waiting for 2nd version to be released!!!!!! cannot wait for the heat + cooling harness!

When is this coming? I want it ALL!