04-13-2019, 08:06 AM | #1 |
Drives: 2018 HBM Camaro ZL1 Join Date: Mar 2018
Location: Omaha, NE
Posts: 8
|
Smoked tail lights fitment
Anyone else’s smoked tail lights fit like this? The right side isn’t so bad, but this side...
|
04-13-2019, 12:20 PM | #2 |
Drives: Camaro ZL1 A10, F-Type R, RR Sport Join Date: Jul 2016
Location: Albania
Posts: 216
|
Are those genuine?
|
04-13-2019, 12:45 PM | #3 |
Drives: 2018 HBM Camaro ZL1 Join Date: Mar 2018
Location: Omaha, NE
Posts: 8
|
I got them from shopchevyparts.com
|
04-13-2019, 08:43 PM | #4 |
Drives: 2019 Chevrolet Camaro SS 1LE Join Date: Nov 2016
Location: Arizona
Posts: 596
|
That photograph accurately depicts how both pairs of factory taillights (i.e., red and tinted) fit on my Camaro (and, namely, the driver side taillight).
|
04-13-2019, 11:30 PM | #5 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,598
|
You could try and reseat the pins, perhaps one isn't all the way in, or the VHB strip that is between the bumper and the taillight housing is creased and forces a bigger gap.
That said, unfortunately this much gap doesn't look out of the realm of possibility with the 1LE smoked tails.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
Post Reply
|
|
|