06-17-2018, 04:02 PM | #197 |
|
Anyone find out how the microphone hooks up to the PDR?
|
06-17-2018, 04:04 PM | #198 |
Almost positive it’s built into the Camera no addition changes was required to make it work after hooking up the camera
__________________
PRIOR CAR:
17' Camaro 2SS A8 Vert Upgrades: Pray MSD IM/95mm TB/E85/Tune / Roto-fab CAI / GM Dark Taillights / LED Turn's with VLED Resisters / LED Reverse Lights / JWM Side Markers / Factory UQT PDR (CTS-V) / BMR DSL, MM010 / TSP 1 7/8 / Front Camera / Eyebrow Harness / Elite Engineering E2-X / AEM Wideband with Aeroforce single pod / HD Radio / OnStar Delete / RPM Roll Bar |
|
06-25-2018, 09:49 AM | #199 |
Drives: 2018 Hot Wheels 2SS Convertible Join Date: Jun 2011
Location: Guelph
Posts: 157
|
This should be obvious but I'm hoping maybe I don't understand how warranties work
Adding the PDR, Camera, GPS and especially re-flashing components ... DEFINITELY voids the warranty right? ... If so, how much of the warrenty, just the electronics or everything? (including the body, powertrain, etc.) ...
__________________
2018 Hot Wheels SE, Convertible, V8, 2SS, A8, MRC, Nav, NPP (WDXNTP)
1100 - 28/05/18 | 2000 - 31/05/18 | 3100 - 05/06/18 | 3400 - 15/06/18 .TPW - 16/07/18 | 3800 - 16/07/18 | 4300 - 17/07/18 | 4200 - 24/07/18 5000 - 25/07/18 | 6000 - 31/07/18 | XPEL - 01/08/18 | HOME - 13/08/18 |
06-25-2018, 11:07 AM | #200 | |
I hack cars.
Drives: Lots ;) Join Date: May 2009
Location: Metro Detroit
Posts: 519
|
Quote:
__________________
Chris White
Some uhhhh cars. |
|
06-25-2018, 11:16 AM | #201 | |
Drives: 2018 Hot Wheels 2SS Convertible Join Date: Jun 2011
Location: Guelph
Posts: 157
|
Quote:
If someone is working on a fully wired harness that will be for sale, and will be able to sell this upgrade in kit format I'm going to be even more excited
__________________
2018 Hot Wheels SE, Convertible, V8, 2SS, A8, MRC, Nav, NPP (WDXNTP)
1100 - 28/05/18 | 2000 - 31/05/18 | 3100 - 05/06/18 | 3400 - 15/06/18 .TPW - 16/07/18 | 3800 - 16/07/18 | 4300 - 17/07/18 | 4200 - 24/07/18 5000 - 25/07/18 | 6000 - 31/07/18 | XPEL - 01/08/18 | HOME - 13/08/18 Last edited by dunedon; 07-04-2018 at 11:31 PM. |
|
07-04-2018, 10:14 AM | #202 |
Drives: silver camaro Join Date: Oct 2017
Location: pleasant hill
Posts: 119
|
|
07-05-2018, 07:16 PM | #203 | |
Drives: '16 2SS GD1 MX0 NPP F55 IO6 Join Date: Jun 2013
Location: Florida
Posts: 1,298
|
Quote:
A few other questions about what is possible through programming: - Could a '17 HMI be transplanted to a '16? - If it can, could the Cadillac native Spotify app co-exist with the Pandora app? - Is HD Radio possible (especially if it requires removing SiriusXM)? - Do you perform BCM programming as well? Could you calibrate '16 MRC controllers? Thanks! |
|
07-11-2018, 06:58 PM | #204 | |
I added HD Radio to my car it requires replacing the A11 module as the one in our cars do not have the HD Radio hardware, when changing the A11 module it will also change your SiriusXM ESN (radio id), so you will need to update it by calling SiriusXM's customer service, but you will lose any promotion time left from the factory radio id.
For reference I ordered module 84278527 105/5/6U2M it will need to be programmed to your car and or custom programmed to include the PDR if you plan to go that route. Quote:
__________________
PRIOR CAR:
17' Camaro 2SS A8 Vert Upgrades: Pray MSD IM/95mm TB/E85/Tune / Roto-fab CAI / GM Dark Taillights / LED Turn's with VLED Resisters / LED Reverse Lights / JWM Side Markers / Factory UQT PDR (CTS-V) / BMR DSL, MM010 / TSP 1 7/8 / Front Camera / Eyebrow Harness / Elite Engineering E2-X / AEM Wideband with Aeroforce single pod / HD Radio / OnStar Delete / RPM Roll Bar |
||
04-02-2019, 02:46 PM | #205 |
Drives: 18 ZL1 1LE HYPER BLUE & 21 F350 Join Date: Apr 2014
Location: oil field
Posts: 25
|
Did you ever get this to work?
|
04-02-2019, 02:47 PM | #206 |
Can you clarify? The PDR is functional as well as the HD Radio
__________________
PRIOR CAR:
17' Camaro 2SS A8 Vert Upgrades: Pray MSD IM/95mm TB/E85/Tune / Roto-fab CAI / GM Dark Taillights / LED Turn's with VLED Resisters / LED Reverse Lights / JWM Side Markers / Factory UQT PDR (CTS-V) / BMR DSL, MM010 / TSP 1 7/8 / Front Camera / Eyebrow Harness / Elite Engineering E2-X / AEM Wideband with Aeroforce single pod / HD Radio / OnStar Delete / RPM Roll Bar |
|
04-04-2019, 02:59 PM | #207 |
Drives: 2018 Camaro ZL1 1LE Join Date: Mar 2017
Location: PR
Posts: 102
|
So after reading all this I feel a bit disappointed and confused lol. I just sold my '13 ZL1 and I'm about to buy a '18 ZL1 1LE that looks absolutely beautiful but apparently it didn't have the PDR. I thought that it will be standard in a ZL1 1LE since it is a track focus car but apparently that's not the case.
|
04-04-2019, 03:02 PM | #208 | |
Quote:
I use my PDR on every drive with my vert, no issues at all works as expected.
__________________
PRIOR CAR:
17' Camaro 2SS A8 Vert Upgrades: Pray MSD IM/95mm TB/E85/Tune / Roto-fab CAI / GM Dark Taillights / LED Turn's with VLED Resisters / LED Reverse Lights / JWM Side Markers / Factory UQT PDR (CTS-V) / BMR DSL, MM010 / TSP 1 7/8 / Front Camera / Eyebrow Harness / Elite Engineering E2-X / AEM Wideband with Aeroforce single pod / HD Radio / OnStar Delete / RPM Roll Bar |
||
04-05-2019, 11:04 PM | #209 | |
Drives: 2018 Camaro ZL1 1LE Join Date: Mar 2017
Location: PR
Posts: 102
|
Quote:
|
|
05-05-2019, 01:51 PM | #210 |
Drives: 2018 ZL1 Camaro Join Date: Mar 2019
Location: Dallas
Posts: 122
|
I made a harness. I have it all installed and had to stop and order a new screen. I thought my ZL1 had two USB ports but doesn't. I was lucky and found ONE on ebay. waiting on it to get here. My harness was made to go to the black connector of the HMI and the gray connector of the ACM a11.
I got lucky on the cost for everything. I found a ZL1 PDR for $250. Bought all the other parts from Tasca for $240 and the connectors from Mouser. The camera was on eBay for $140. I have USB cables for my work I used. I also used a corvette camera because it has a female USB rather than a male. I have a CTS-V//ZL1 camera incase but they are identical minus the connector. I am excited to see if I can make this work because If I can the harness is a slam dunk and I can have them made pretty easy. I also know people that could possibly make a OBD programmer to add the PDR programming needed. Ill let everyone know once its finished. One question I do have is what thread size is the nut to hold down the PDR.? I forgot, I want to thank Night Owl and MBNWA. Very good work and you really deserve a lot of thanks for the effort for this. People always right these things off as not possible and that's is just not the case. I have done a lot of these types things for other brands and appreciate the work it takes. This is something I really wanted and didn't get because I wanted an 18 and didn't have a lot of choice. So thanks for figuring it out and thanks for not sealing the documents and preventing others from benefiting from your work. Last edited by JD2018_ZL1; 05-05-2019 at 02:02 PM. |
|
|
Post Reply
|
|
|