02-24-2024, 05:34 PM | #1 |
Drives: 2013 Hot Wheels Edition 2SS/RS Join Date: Jun 2015
Location: Orlando, FL
Posts: 198
|
Center Cap for Factory Reproduction Wheels
Just bought Factory Reproduction FR27F Z28 replica wheels that came with plain black center caps. I was hoping to use my old OEM caps (black with silver bowtie) from my 2013 2SS HWSE part number 9594156, but they don't fit. Outside face is perfect, but they don't click in and stay. I was thinking maybe the Hot Wheels 21" rims had a funky center cap size, so...
I ordered a set of OEM GM caps part 22791586, but same issue. It's obvious that the flexible "teeth" inside clip ring diameter is bigger on the aftermarket cap than the OEM. Does anybody know what OEM GM caps will fit the Factory Reproduction wheel center cap hole??? |
02-25-2024, 12:33 AM | #2 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
I don't know if it's the same with Factory Reproduction wheels, but my MRR 017's (6th gen 1LE reproductions) use the 6th gen OEM center caps. It may be the same for your wheels.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
02-25-2024, 12:13 PM | #3 |
Drives: 2010 Synergy Green Camaro 1LT Join Date: Jun 2019
Location: Orlando
Posts: 202
|
CHeck Phastek ... I got mine through them when I got my MRR's
|
|
|
|
|