12-19-2018, 12:16 PM | #15 |
Drives: 2016 2SS Join Date: Apr 2018
Location: Florida
Posts: 194
|
Here are some pictures, I will get a better picture of the new stance with better lighting later. I just dropped it off for an alignment will be picking it up after work.
|
12-20-2018, 12:10 PM | #16 |
Drives: 2016 2SS Join Date: Apr 2018
Location: Florida
Posts: 194
|
There is alot of popping noises and creaking noises when going slow, when im on high speeds everything is fine. Everything is installed correctly, however, there is all these sounds, does anyone have any idea what it could be? It handles amazing though!
|
12-20-2018, 01:24 PM | #17 | |
Hot Dog
Drives: '17 1SS 1LE Join Date: Feb 2016
Location: Metro Detroit
Posts: 1,937
|
Quote:
You probably didn't torque the strut top nut or the ARB drop-links enough. Also the ARB bushing mounts might not be tight either. Getting that driver-side rear ARB bushing needs a creative combination of extensions and swivel joints. Put it back in the air and double check your work. Also, did you torque the ARB bushing mounts at ride height? If not, you're incorrectly preloading the bushings. Fix it and then get it aligned to the Performance Supplement FE4 "track" alignment. You'll be impressed.
__________________
2017 "M1SS1LE" in Hyper Blue w/PDR
|
|
12-20-2018, 02:06 PM | #18 | |
Drives: 2016 2SS Join Date: Apr 2018
Location: Florida
Posts: 194
|
Quote:
|
|
12-21-2018, 03:58 PM | #19 |
Drives: 2017 Camaro 1SS M6 Join Date: Apr 2015
Location: Indy
Posts: 2,460
|
Were you able to pinpoint the cause of the clunking?
__________________
2017 Camaro 1SS, M6, Hurst shifter, Hyper Blue, NPP, Gray Split Spoke Wheels
Best 1/4 Mile: 12.24 @ 115.9 mph |
12-21-2018, 04:01 PM | #20 |
Drives: 2019 Chevrolet Camaro SS 1LE Join Date: Nov 2016
Location: Arizona
Posts: 596
|
Upon having the vehicle inspected, please provide us with more thoughts regarding any change (positive or negative) in ride quality.
|
12-21-2018, 08:53 PM | #21 |
Drives: 2016 2SS Join Date: Apr 2018
Location: Florida
Posts: 194
|
|
12-21-2018, 08:57 PM | #22 |
Drives: 2016 2SS Join Date: Apr 2018
Location: Florida
Posts: 194
|
I will update once I get it back fixed. However, even with the clunking noise the suspension felt like stock but was super tight when you pushed it. I was very impressed. There was a turn that I could normally take at .60g and now I could take it at .80g with ease.
|
12-23-2018, 05:57 PM | #23 |
Drives: 2016 camaro ss Join Date: Dec 2018
Location: Illinois
Posts: 6
|
Is your camaro 1 or 22ss?
|
12-23-2018, 05:59 PM | #24 |
Drives: 2016 camaro ss Join Date: Dec 2018
Location: Illinois
Posts: 6
|
What includes full 1le kit and where did you get it ? Info please
|
12-23-2018, 08:00 PM | #25 | |
Drives: 2017 Camaro 1SS M6 Join Date: Apr 2015
Location: Indy
Posts: 2,460
|
Quote:
https://www.shopchevyparts.com/perfo...-92292557.html https://www.shopchevyparts.com/perfo...-92294544.html
__________________
2017 Camaro 1SS, M6, Hurst shifter, Hyper Blue, NPP, Gray Split Spoke Wheels
Best 1/4 Mile: 12.24 @ 115.9 mph |
|
12-26-2018, 08:01 PM | #26 |
Drives: 2019 Chevrolet Camaro SS 1LE Join Date: Nov 2016
Location: Arizona
Posts: 596
|
TTT
|
12-26-2018, 08:03 PM | #27 |
Drives: 2016 2SS Join Date: Apr 2018
Location: Florida
Posts: 194
|
|
01-02-2019, 10:56 PM | #28 |
Drives: 2019 Chevrolet Camaro SS 1LE Join Date: Nov 2016
Location: Arizona
Posts: 596
|
Is your Camaro still at the dealership?
|
|
|
Post Reply
|
|
|