Anyone installed ZZP Intercooler?

Mjollnir · 11-27-2017, 09:23 PM

All,

At some point this week I'll be installing the ZZP intercooler and wanted to
know anyone else has completed this installation. It's seems pretty straight
forward but always nice to get some input like do's don'ts tips or tricks.

Thanks,
-BN

Evil-Bee-NH · 11-28-2017, 12:10 AM

I think Adp2017 has and i believe 2.0godfather has as well.

Adp2017 · 11-28-2017, 11:14 AM

Yes, I did the install at home by myself. I am no professional but found it straight forward and easy, just takes time.

Use Mishimoto's youtube video for the oil cooler install to get a full how-to for removing the front fascia.

Good Luck!

Adp2017 · 11-28-2017, 11:33 AM

oh ya and be careful with those A/C condenser lines!

Mjollnir · 11-28-2017, 10:42 PM

Quote:

Originally Posted by Adp2017

Yes, I did the install at home by myself. I am no professional but found it straight forward and easy, just takes time.

Use Mishimoto's youtube video for the oil cooler install to get a full how-to for removing the front fascia.

Good Luck!

Thanks Adp2017!
The video was very helpful.

-BN

Zzsteve · 11-29-2017, 10:06 AM

Quote:

Originally Posted by Adp2017

oh ya and be careful with those A/C condenser lines!

^^^THIS!!!!^^^^^ the install is pretty straight forward, as stated. just time consuming. LOTS of little bolts and fasteners holding the front bumper on. just take your take, take photos along the way for reference, and BE CAREFUL of the AC line. i have had several reports of people breaking them.

Adp2017 · 11-29-2017, 11:49 AM

Quote:

Originally Posted by Mjollnir

Thanks Adp2017!
The video was very helpful.

-BN

glad to hear it!

RedonBlackRS · 11-29-2017, 01:37 PM

Has anyone installed it with the HD cooling package?
I just want to make sure it doesn't interfere with the horizontally mounted aux oil cooler.
Thanks!

Mjollnir · 12-07-2017, 10:00 PM

Update:

The installation went well during the 5 hours it took to install. It's was tedious with all the
small trim hardware to keep track of. One thing before starting is check all the hardware
supplied as I was short 4 5/15 nuts.

Zzsteve · 12-08-2017, 08:12 AM

Quote:

Originally Posted by Mjollnir

Update:
The installation went well during the 5 hours it took to install. It's was tedious with all the
small trim hardware to keep track of. One thing before starting is check all the hardware
supplied as I was short 4 5/15 nuts.

Can you email me a detailed list of anything that was missing, or anything else that didnt work 100%, so that i can look into it please?

steve@ZZPerformance.com

Mjollnir · 12-08-2017, 10:10 AM

Quote:

Originally Posted by Zzsteve

Can you email me a detailed list of anything that was missing, or anything else that didnt work 100%, so that i can look into it please?

steve@ZZPerformance.com

Will do!

geoffchad · 12-08-2017, 11:37 AM

Quote:

Originally Posted by Zzsteve

Can you email me a detailed list of anything that was missing, or anything else that didnt work 100%, so that i can look into it please?

steve@ZZPerformance.com

#goodcustomerservice

ZZTimC · 12-12-2017, 02:47 PM

To anyone worried about breaking AC lines, don't be. It's a pretty easy operation to move them out of the way.

11-27-2017, 09:23 PM	#1
Mjollnir Drives: 2017 1LS White Join Date: Oct 2016 Location: California Posts: 119	Anyone installed ZZP Intercooler? All, At some point this week I'll be installing the ZZP intercooler and wanted to know anyone else has completed this installation. It's seems pretty straight forward but always nice to get some input like do's don'ts tips or tricks. Thanks, -BN

11-28-2017, 12:10 AM	#2
Evil-Bee-NH 603 Camaros Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012 Location: Manchester, NH Posts: 6,779 View My Garage	I think Adp2017 has and i believe 2.0godfather has as well. __________________ MY 2017 I4 CAMARO BUILD JOURNAL \| YOUTUBE \| INSTAGRAM \| 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE \| 12.693s @ 105MPH 1/4 Mile

11-28-2017, 11:14 AM	#3
Adp2017 Drives: 2017 RS Turbo Join Date: Aug 2016 Location: Burlington, Ontario Posts: 376	Yes, I did the install at home by myself. I am no professional but found it straight forward and easy, just takes time. Use Mishimoto's youtube video for the oil cooler install to get a full how-to for removing the front fascia. Good Luck! __________________ 2017 1LT \| RS \| 2.0T \| M6 331 rwhp , 350 rwtq ZZP Intercooler \| ZZP Catted DP \| Magnaflow Catback \| Injen CAI \| Tuned (BBR) \| CNC Honed Turbo (TPC) w 14lb actuator

11-28-2017, 11:33 AM	#4
Adp2017 Drives: 2017 RS Turbo Join Date: Aug 2016 Location: Burlington, Ontario Posts: 376	oh ya and be careful with those A/C condenser lines! __________________ 2017 1LT \| RS \| 2.0T \| M6 331 rwhp , 350 rwtq ZZP Intercooler \| ZZP Catted DP \| Magnaflow Catback \| Injen CAI \| Tuned (BBR) \| CNC Honed Turbo (TPC) w 14lb actuator

12-07-2017, 10:00 PM	#9
Mjollnir Drives: 2017 1LS White Join Date: Oct 2016 Location: California Posts: 119	Update: The installation went well during the 5 hours it took to install. It's was tedious with all the small trim hardware to keep track of. One thing before starting is check all the hardware supplied as I was short 4 5/15 nuts. Last edited by Mjollnir; 12-08-2017 at 10:11 AM.

11-29-2017, 01:37 PM	#8
RedonBlackRS Drives: 1LT RS 2.0T 8A HD Join Date: Feb 2016 Location: McHenry, IL Posts: 239	Has anyone installed it with the HD cooling package? I just want to make sure it doesn't interfere with the horizontally mounted aux oil cooler. Thanks!

12-12-2017, 02:47 PM	#13
ZZTimC Drives: 2017 Camaro RS 2.0 Join Date: Nov 2017 Location: Wyoming, MI Posts: 3	To anyone worried about breaking AC lines, don't be. It's a pretty easy operation to move them out of the way.

User Name		Remember Me?
Password