Does the Z/28 use the same rear/trunk bowtie as the lower models?

[HoodCheck]

I'm looking at a custom painted rear bowtie from rpidesigns (just to get black with chrome trim), but the site is saying the bowties don't work on the Z/28. I *think* thats because its marketed as a front/rear set, and obviously the front wouldn't work (you can elect to buy rear only). When I checked gmpartsdirect, it says the rear emblem is the same for all the 2014-2015 models; yet I see ZL1 specific and SS/LT/RS emblems on other sites.
Don't want to order it if its not going to fit (I ordered a spare rear emblem to paint myself otherwise).

[Coz3z3]

14-15 should be the same as the trunk lids are all the same. I even put the newer 16-18 rear on my car because it's black from factory on the ZL1 and 1LE. And it's same size and everything too

[HoodCheck]

Originally Posted by Coz3z3

14-15 should be the same as the trunk lids are all the same. I even put the newer 16-18 rear on my car because it's black from factory on the ZL1 and 1LE. And it's same size and everything too

Thats what I'm thinking. Part 23266631 shows for all 2014-2015 models (but its also discontinued apparently). If the 6th gen bowtie works though, that will make things much easier. Actually I still have a cf look/hydrodipped bowtie that I should get soon that I had ordered for my '17 ZL1 that I sold.

[Z28Ruthless]

Can confirm that the rear bowtie is the same on all trim level/sub model 14 and & 15 camaros. Just checked my estimating system at the shop and confirmed with my gm parts guy.

[HoodCheck]

Originally Posted by Z28Ruthless

Can confirm that the rear bowtie is the same on all trim level/sub model 14 and & 15 camaros. Just checked my estimating system at the shop and confirmed with my gm parts guy.

Thank you!

[Z28Ruthless]

Originally Posted by HoodCheck

Thank you!

You are welcome!