Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions


AWE Tuning


Post Reply
 
Thread Tools
Old 09-27-2016, 06:10 PM   #15
cellsafemode


 
cellsafemode's Avatar
 
Drives: 2016 Camaro 1LT
Join Date: Jan 2016
Location: California
Posts: 2,275
So when you throw your right turn signal on, does the glow-tie turn off like the rh drl will?
cellsafemode is offline   Reply With Quote
Old 09-28-2016, 11:56 AM   #16
Hyper1SS

 
Hyper1SS's Avatar
 
Drives: 2016 Hyper Blue Metallic 1SS M6 NPP
Join Date: Jan 2016
Location: Indiana
Posts: 824
Quote:
Originally Posted by cellsafemode View Post
So when you throw your right turn signal on, does the glow-tie turn off like the rh drl will?
No. It stays on
__________________


2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates.

Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers


Order ID: TDHQMS
1100 on 01/07/2016 at Penske Chevrolet
6000 on 02/23/2016 Delivered to customer
Hyper1SS is offline   Reply With Quote
Old 12-25-2017, 10:11 PM   #17
maxboy02
 
Drives: 2017 F1FTY Camaro 2SS
Join Date: Nov 2017
Location: Utah
Posts: 3
A couple things that helped me with my install that I would add that hasn't really been shown:

to remove the upper fascia support, I had to bend the hood release over as the arrow shows in order to have access underneath

https://flic.kr/p/DenwoB

After I drilled out the hole behind where the original emblem was, I mounted the glow-tie in its place and routed the cable as shown:

https://flic.kr/p/22SMrz6

Instead of removing the whole front bumper, I removed the wheel liner and switched the harness per the install instructions:

https://flic.kr/p/22SM3RF
https://flic.kr/p/21xm26c

Turned out great!

https://flic.kr/p/DenghK
maxboy02 is offline   Reply With Quote
Old 03-17-2018, 11:02 AM   #18
G2K
 
G2K's Avatar
 
Drives: 2017 1LE
Join Date: Jun 2017
Location: Pembroke Pines, FL
Posts: 230
Thanks guys
Attached Images
 
__________________
G2K is offline   Reply With Quote
Old 03-17-2018, 10:27 PM   #19
GA Camaro 2SS
 
GA Camaro 2SS's Avatar
 
Drives: 2017 Camaro 2SS Convertible
Join Date: Sep 2017
Location: Atlanta, GA.
Posts: 210
That black glow tie looks awesome on these black cars. Mine was installed from the dealer before I bought it. I would have done it myself and saved the cash if I had the choice. $395 is a tad high in my opinion but a must have in my book. Loving it.
GA Camaro 2SS is offline   Reply With Quote
Old 04-24-2018, 01:43 AM   #20
aldaran
 
aldaran's Avatar
 
Drives: 2016 Camaro 2SS/RS
Join Date: Oct 2008
Location: Alice, Texas
Posts: 568
Just ordered mine and can't wait to get it. Already have the black bowties and only ordered the front black illuminated bowtie for $199 on ebay.
__________________
2016 2SS: Silver Ice, A8 Auto, Adrenaline Red, Black Rally Stripes, and Black bowties.
My Journey.....
1100 Status - 08/17/2015 : 2000 Status - 09/28/2015
2500 Status - 09/29/2015 : 3000 Status - 09/29/2015
3000 Status - 10/19/2015 TPW 11/9
3800 Status - 11/04/2015 Seq: 122808
4300 Status - 12/17/2015 (Charlotte, MI)
4200 Status - 01/08/2016
4800 Status - 01/14/2016
5000 Status - 01/19/2016
6000 Status - 01/20/2016
aldaran is offline   Reply With Quote
Old 10-30-2018, 10:22 PM   #21
custommx3
 
custommx3's Avatar
 
Drives: 2017 2ss
Join Date: Aug 2014
Location: Memphis
Posts: 265
Quote:
Originally Posted by maxboy02 View Post
A couple things that helped me with my install that I would add that hasn't really been shown:

to remove the upper fascia support, I had to bend the hood release over as the arrow shows in order to have access underneath

https://flic.kr/p/DenwoB

After I drilled out the hole behind where the original emblem was, I mounted the glow-tie in its place and routed the cable as shown:

https://flic.kr/p/22SMrz6

Instead of removing the whole front bumper, I removed the wheel liner and switched the harness per the install instructions:

https://flic.kr/p/22SM3RF
https://flic.kr/p/21xm26c

Turned out great!

https://flic.kr/p/DenghK
THANK YOU!!
custommx3 is offline   Reply With Quote
Old 10-31-2018, 08:02 PM   #22
OVERPAR73
2018 Garnet Red ZL1 conve
 
OVERPAR73's Avatar
 
Drives: 2013 & 2018 ZL1 vert
Join Date: May 2009
Location: Des Moines, IA
Posts: 1,385
I wish they had some sort of lighted bow tie for the flow tie. I just added a lighted red bow tie on the back of my 2018 ZL1 vert from Oracle. I have a red lighted bow tie on the front (from RiverCityCreation.com) and rear (from Oracle), they look really nice on my 2013 ZL1 vert. I always get asked where I got these mods if I have the car out at night.
__________________
Build Thread: 2018 ZL1 Vert Purchased (Overpar73)
OVERPAR73 is offline   Reply With Quote
Old 10-31-2018, 10:32 PM   #23
custommx3
 
custommx3's Avatar
 
Drives: 2017 2ss
Join Date: Aug 2014
Location: Memphis
Posts: 265
Just a few notes for those doing this.. If you have all the tools you can do this in <30 mins easy. You do not have to take the wheel off nor the front bumper.... unless you have huge forearms.

If you remove the upper bumper support, as mentioned you need to bend the hood latch back a bit, its a lot easier.

I used a step bit to drill the hole for the new emblem. I noticed it needs more cut off the bottom.

Jack up the passenger side tire.
Remove the bottom bolt. This is easier if you turn the wheel left.
Remove the next three holding in the liner (easier turning the wheel to the right)

The clip is connected vertically and plugs into the bottom of the "ballast".
The connector has a clip that needs to be pulled down, then the button will release the connector. Since the connector is the same as the one in the new glowtie harness, you can look at the one you're about to plug in as an example.

If you leave a light in the fenderwell you can easily see where the harness needs to feed.


Hope this helps!
custommx3 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:00 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.