02-08-2021, 06:41 PM | #1 |
Drives: 18 ZL1 1le Join Date: Aug 2019
Location: Arizona
Posts: 97
|
Npp exhaust valve
Does anyone have the pin out of the exhaust valves?
|
02-08-2021, 07:44 PM | #2 |
Drives: 2022 Vivid Orange Metallic LT1 Join Date: Mar 2020
Location: MI Lansing Area
Posts: 72
|
Is this what your looking for?
|
02-08-2021, 09:06 PM | #3 |
Drives: 18 ZL1 1le Join Date: Aug 2019
Location: Arizona
Posts: 97
|
|
02-09-2021, 08:27 AM | #4 |
Drives: 2023 2SS Convertible Join Date: May 2009
Location: Metro Detroit
Posts: 1,063
|
The four rectangles along the bottom are the four NPP valve connector pinouts. Two on the left are for the AFM valves, two on the right are for the loudness control.
FYI, If you are just thinking you can put a switch with a hot lead to open and close them, it won't work. You need a specific PWM signal from the controller. You could switch the valves from "working" to "not working" by opening the hot lead, but that is it (so if they were closed when you switched it, they would stay closed, and visa versa). -Geoff
__________________
'12 2SS RS Convertible - Traded in.
'16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold! '23 2SS Convertible -Same as above except orange. |
|
|
Post Reply
|
|
|