09-04-2020, 02:24 PM | #1 |
Drives: 2018 Hyper Blue ZL1 1LE Join Date: Dec 2018
Location: CA
Posts: 1,360
|
OEM ZLE front 11" wheel on back?
Sorry if this is easy to answer with search...
Will an OEM ZLE front 19x11 fit on rear? I'm wondering if I can use one as a spare (front or rear) in case of flat. |
09-04-2020, 04:02 PM | #2 |
Drives: 2018 ZL1 1LE Join Date: May 2019
Location: South Florida
Posts: 438
|
I dont see why not, a 12 inch wheel sits back there to begin with.
__________________
Subscribe to my Youtube channel!
https://www.youtube.com/c/Junkyardspecial Will buy your GoodYear Supercar 3R Take offs! |
09-04-2020, 04:05 PM | #3 |
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
I would check the offset. Of course, the best thing would be to put the front on the rear and check it. I want to think the offsets between the front and back are different on mine?
|
09-04-2020, 04:59 PM | #4 |
Drives: 2018 Hyper Blue ZL1 1LE Join Date: Dec 2018
Location: CA
Posts: 1,360
|
Yes, offsets are different but that shouldn't prevent using it for a few miles as a spare to get to tire shop.
I assume it works because the front calipers are a lot larger, hoping for a quick answer from experience to avoid test fitting. Thanks! |
09-04-2020, 06:00 PM | #5 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,749
|
I think the OEM front ZLE wheel has very little offset, like +11 or something. It will work, but just stick out of the wheel well more.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
09-04-2020, 07:19 PM | #6 |
Drives: 2018 Hyper Blue ZL1 1LE Join Date: Dec 2018
Location: CA
Posts: 1,360
|
|
09-04-2020, 08:09 PM | #7 |
Drives: 2016 2SS Convertible Join Date: May 2012
Location: St. Louis, MO
Posts: 1,710
|
SS 1LE and regular ZL1:
20x10 +20 front 20x11 +43 rear ZL1 1LE: 19x11 +11mm front 19x12 +41mm rear The ZLE wheel and tire will stick out 32 mm or 1.26”. |
|
|
Post Reply
|
|
|