You are browsing camaro6 
01-04-2024, 09:02 PM
|
#1 |
 Drives: Camaro ZL1 Join Date: Apr 2020
Location: Australia
Posts: 30
|
WELD S71, 18 X 7 fitment on MY19 ZL1
Does anyone run / know if the Weld S71, 18 x 7 (High Pad), Part Number 71HB8070N41A will fit on a 2019 ZL1 without the need for wheel spacers or issues with the brakes / calipers contacting the wheel? Not keen on running a 18 x 5 as the car is driven to / from the track (75 mile round trip).
Has anyone done a back to back to see what lighter front wheels / narrower tires vs OEM wheels / tire's is actually worth over the 1/4 ? Hoping the wheels/narrower tire's would yield approx 0.1 at the track. Thanks for any feedback 
Last edited by RHD ZL1; 01-13-2024 at 04:20 PM. |
|
|
|
01-13-2024, 04:21 PM
|
#2 |
|
Drives: Camaro ZL1 Join Date: Apr 2020
Location: Australia
Posts: 30
|
Just a heads up to anyone seeking the answer to this is the future, Weld finally confirmed that a 3/8" spacer is required to run these wheels on a ZL1.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
