20x10.5 25 et? W/ 295 or 315?

Goohead · 07-09-2017, 05:01 PM

Anyone have this setup? Seems most 11" rear rims are 35-38mm can anyone confirm this will fit?

From offset calf it looks like 27mm stick out more than stock 9.5"? I could have the stock offset wrong

LSmith353 · 07-09-2017, 05:47 PM

http://www.camaro6.com/forums/showthread.php?t=495728

MRR FS01 10.5 wide with a +14 offset. To my knowledge, this is the only 10.5" setup that clears AND allows recommended negative camber for track alignment. A couple of guys have done it with a +25 offset on a 10.5 but had to grind on the strut. Search Apex.....

BradfordCamaro · 07-09-2017, 07:08 PM

For the rear? Or front? Square.....?

25mm in the back would look silly.

Currently. 20x11 is run with 43mm offset.(15mm poke) Sometimes lower in the 38mm offset range giving 20mm more poke than stock.

A 10.5" with 25mm will put the poke at 26mm. Too much.

I would leave the tire at 295 or 305.

seanblurr · 07-09-2017, 07:12 PM

Don't run a 315 on a 10.5" wheel.

I have a 19x11 +36 on the rear and it fits fine and does not poke past the fender.

LSmith353 · 07-09-2017, 08:29 PM

Quote:

Originally Posted by BradfordCamaro

For the rear? Or front? Square.....?

25mm in the back would look silly.

Currently. 20x11 is run with 43mm offset.(15mm poke) Sometimes lower in the 38mm offset range giving 20mm more poke than stock.

A 10.5" with 25mm will put the poke at 26mm. Too much.

I would leave the tire at 295 or 305.

Sorry, I should have been more clear. I was only addressing the 10.5 fronts. The offset mentioned in the original post for the 11" rears will work base on the thread I referenced.

Goohead · 07-21-2017, 08:40 PM

Thanks for the reply guys

To clarify I was looking at

Front 9" 18 offset
Rear 10.5 25 offset

20"

I saw the thread Lsmith thanks it looks like that might work stock height and 19" worried about lowered maybe ~1 in the future and still running the same offset w/ 27mm poke out will rub?

07-09-2017, 05:01 PM	#1
Goohead Horsepower whisperer Drives: Camaro Join Date: Jun 2017 Location: MO Posts: 185	20x10.5 25 et? W/ 295 or 315? Anyone have this setup? Seems most 11" rear rims are 35-38mm can anyone confirm this will fit? From offset calf it looks like 27mm stick out more than stock 9.5"? I could have the stock offset wrong

07-09-2017, 05:47 PM	#2
LSmith353 Drives: 2015 Ultimate Track SS Join Date: Apr 2015 Location: Stonewall, LA Posts: 154	http://www.camaro6.com/forums/showthread.php?t=495728 MRR FS01 10.5 wide with a +14 offset. To my knowledge, this is the only 10.5" setup that clears AND allows recommended negative camber for track alignment. A couple of guys have done it with a +25 offset on a 10.5 but had to grind on the strut. Search Apex..... __________________ 2015 2SS Ultimate Track Camaro https://www.racingjunk.com/news/2014...ack-camaro-ss/ 2016 2SS M6, MRC, NPP, Nav, Sunroof -- SOLD 2010 2SS/RS M6 -- SOLD

07-09-2017, 07:08 PM	#3
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	For the rear? Or front? Square.....? 25mm in the back would look silly. Currently. 20x11 is run with 43mm offset.(15mm poke) Sometimes lower in the 38mm offset range giving 20mm more poke than stock. A 10.5" with 25mm will put the poke at 26mm. Too much. I would leave the tire at 295 or 305. __________________

07-09-2017, 07:12 PM	#4
seanblurr Drives: ZL1 1LE Join Date: Oct 2016 Location: California Posts: 1,297	Don't run a 315 on a 10.5" wheel. I have a 19x11 +36 on the rear and it fits fine and does not poke past the fender. __________________

07-21-2017, 08:40 PM	#6
Goohead Horsepower whisperer Drives: Camaro Join Date: Jun 2017 Location: MO Posts: 185	Thanks for the reply guys To clarify I was looking at Front 9" 18 offset Rear 10.5 25 offset 20" I saw the thread Lsmith thanks it looks like that might work stock height and 19" worried about lowered maybe ~1 in the future and still running the same offset w/ 27mm poke out will rub?

User Name		Remember Me?
Password