10-27-2018, 10:18 PM | #1 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
305/35/20 Nitto 555r on stock wheels.
Put a set of these on my ride today. They fit the stock rear wheels great. Look good, handle fine, and they hook great. I was able to do a 1200rpm launch and pretty much dead hook on 47 degree roads. No wag like you tend to get with MT's either. On stock run flats I was spinning from a 40 roll in second. First try was a 3.8 0-60 with 30psi in the tires.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA Last edited by KingLT1; 03-12-2020 at 09:29 AM. |
10-27-2018, 11:16 PM | #2 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,741
|
Well, looks like I know what my next set of rear tires will be then... great info, thanks for the pics too!
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
10-28-2018, 08:34 AM | #3 |
Drives: SS1 convertible Join Date: Sep 2016
Location: Indiana
Posts: 23
|
Are the wheels chrome plated? They look great!
|
10-28-2018, 08:40 AM | #4 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
Thanks!
They are PVD coated in a chrome finish. Kind of like a cross between Chrome and Polish... They won't pit or peel like Chrome plating. They do scratch but you can polish them out. Won't dull up like Polish. The PVD coating also doesn't add weight. Detroit wheel offers PVD in both black chrome and regular chrome. Forgot to mention in OP that I did relocate the harness on driver side rear since it's tight...super easy to do so no biggie.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
10-30-2018, 11:01 AM | #5 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
Dropped them down to 28 psi and this was the result.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
10-30-2018, 11:21 AM | #6 |
Drives: '18 Camaro SS Join Date: Sep 2018
Location: HTX
Posts: 176
|
Looking good man. Love the way the 305/35/20 tires sit.
|
10-30-2018, 05:11 PM | #7 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
Thanks! Me too...it really changed the look of the car.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
10-30-2018, 08:06 PM | #8 |
Drives: 2017 Camaro 2SS Nightfall Gray vert Join Date: Jan 2018
Location: Swansea, IL
Posts: 1,219
|
I assume you had to move the wiring harness?
__________________
2017 Camaro 2SS vert - Nightfall Gray
Magnuson Heartbeat SC - Tuned by JRE Racing 776whp/745wtq (12psi) 2018 Corvette Z06 vert- Black To be tuned by JRE Racing TBD performance |
10-30-2018, 09:18 PM | #9 |
Drives: 2017 Mosaic Black 2SS Join Date: Jul 2013
Location: Wheeling
Posts: 31
|
Looks good!! Gonna be my next purchase
|
10-30-2018, 09:25 PM | #10 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
Yes..super easy to do. I replied in your thread about it.
Thank you sir!
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
10-31-2018, 08:36 PM | #11 |
War Horse Pilot
|
Where is the wire harness relocation thread? My Google search didn't find it.
|
11-01-2018, 09:08 AM | #12 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
https://www.camaro6.com/forums/showthread.php?t=485975
I will add that I would suggest poking a hole in the liner and adding a push clip to gain clearance so you don't rub through the liner as well. It's easy...there will be hole in the frame in the area where you see the liner has bee rubbed through in the picture. Poke a hole in that spot and use a push clip.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
06-18-2019, 08:37 PM | #13 |
Black lightning
|
Holyyyy craappppppp
__________________
[ 2021 Camaro ZLE 10 speed
|
06-18-2019, 08:40 PM | #14 |
Black lightning
|
Where you launch at 2000rpm
__________________
[ 2021 Camaro ZLE 10 speed
|
|
|
Post Reply
|
|
|