You are browsing camaro6 
06-21-2019, 12:55 PM
|
#1 |
|
@blackout__ss on insta
Drives: 2018 Camaro 2ss Join Date: Aug 2018
Location: Chicago, Illinois
Posts: 23
|
Installing my Flowmaster Axle back
Hey everyone!
I had a quick question for anyone who installed their axle back themselves. What tool did you use to cut the stock exhaust with? I've heard sawzall, grinder and even the chain cutter and was wondering what was easiest with our cars! Thanks! |
|
|
|
06-21-2019, 12:59 PM
|
#2 |
 
Drives: 2019 GMC Sierra 1500 AT4 Join Date: Nov 2011
Location: Orange, TX
Posts: 740
|
I used this with my headers. Simple and straight.
https://www.amazon.com/OEMTOOLS-2704.../dp/B004FELJ20
__________________
2019 GMC Sierra 1500 AT4
Summit White 6" Lift, 37x13.50R24's |
|
|
|
|
06-21-2019, 01:01 PM
|
#3 |
|
Drives: 2016 Camaro 2SS Join Date: Nov 2016
Location: North Jersey
Posts: 591
|
Sawzall will cut through it like butter.
Sent from my iPhone using Tapatalk |
|
|
|
|
06-21-2019, 01:35 PM
|
#4 |
|
@blackout__ss on insta
Drives: 2018 Camaro 2ss Join Date: Aug 2018
Location: Chicago, Illinois
Posts: 23
|
Did you guys do the work on a lift or on jack stands?
|
|
|
|
|
06-21-2019, 02:03 PM
|
#5 |
        Drives: '16 Garnet Red 1SS Join Date: Mar 2014
Location: College Station, TX
Posts: 3,450
|
The exhaust shop I went to used a chain cutter like posted above.
__________________
'16 Camaro 1SS
'18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata |
|
|
|
|
06-22-2019, 06:47 AM
|
#6 |
|
Drives: 2019 GMC Sierra 1500 AT4 Join Date: Nov 2011
Location: Orange, TX
Posts: 740
|
I did my long tubes on jack stands in my garage. Lift would have been nice, but I don't know anyone with one.
__________________
2019 GMC Sierra 1500 AT4
Summit White 6" Lift, 37x13.50R24's |
|
|
|
|
06-23-2019, 12:01 PM
|
#7 | |
|
Banned
Drives: 2017 Super Sport Cam. Join Date: Feb 2018
Location: US
Posts: 893
|
Quote:
Just rent a pipe cutter chain and some wrenches is all you need. |
|
|
|
|
|
06-23-2019, 10:43 PM
|
#8 |
 
Drives: 2010 camaro RS,2017 camaro 1Le Join Date: Mar 2016
Location: Charlotte, NC
Posts: 195
|
I tried using a grinder when installing my midpipe and axleback it didn't go well the grinder could not reach the top portion of the pipe. If I had to do it over I would use a sawzaw as that worled a million times better when installing headers
__________________
2017 camaro 1le
ROTO fab, Ported MSD, Ported 95mm tb, 2in TSP catless longtubes, flowmaster x-pipe, flowmaster American thunder npp, flex fuel, |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
