01-18-2020, 05:35 PM | #1 |
Drives: 6th gen camaro ss Join Date: Oct 2018
Location: Colorado
Posts: 46
|
tsp headers & mbrp catback exhaust
do the tsp headers bolt up to mbrp catback with out any modifications
|
01-25-2020, 04:21 PM | #2 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
You will need to weld. Any of the catbacks or xpipes that delete the rear cats will need to be welded to connection pipes of the headers. Without a true connection point its difficult. We usually recommend to get a set of headers with a full Xpipe and then get a axleback if you still need more volume.
|
01-28-2020, 04:05 PM | #3 |
Drives: 2018 camaro ss Join Date: Oct 2018
Location: Louisiana
Posts: 9
|
What about the AWE touring catback exhaust?? Looking to get headers also but not sure what modifications if any would need to be done.
|
01-30-2020, 09:01 AM | #4 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
Any catback that deletes the rear cats will overlap with long tubes and require welding.
|
02-29-2020, 11:52 PM | #5 |
Drives: 2018 Camaro SS 1LE M6 Join Date: Oct 2018
Location: Northern California
Posts: 345
|
Mbrp doesn’t delete the cats at all.
__________________
Camaro 2SS 1LE, MBRP Catback, Mishimoto Catch Can, Rotofab dry, TSP1 7/8” headers,DSX FF, Pray ported MSD, 95mm TB
492WHP 473WTQ |
03-01-2020, 10:31 PM | #6 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
With the MBRP catback you would be good with any headers/connection pipes. Should sound amazing. If you still need the parts hit us up.
|
|
|
Post Reply
|
|
|