01-26-2020, 09:44 PM | #1 |
Drives: Chevrolet Camaro Join Date: May 2019
Location: South Dakota
Posts: 45
|
Lt4 blower swap
Starting to feel like I’m way in over my head on this project. I bought a lt4 swap for my 16 SS. The blower has the Pcv on the bottom of the blower welded shut. It also comes with a lt4 valley cover. Do I need to get a MM catch can to run this as is? Or are people letting that vent to atmosphere?
Thanks |
01-27-2020, 07:12 AM | #2 |
Drives: Chevrolet Camaro Join Date: May 2019
Location: South Dakota
Posts: 45
|
Perfect. Thanks
|
01-28-2020, 03:32 PM | #3 |
Account Suspended
Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011
Location: St. Charles, IL
Posts: 18,663
|
+1 on getting a catch can. These LT motors build a ton of crank case pressure under boost.
|
02-06-2020, 08:20 AM | #4 |
Drives: Chevrolet Camaro Join Date: May 2019
Location: South Dakota
Posts: 45
|
On the lt1 valley cover what are you guys doing with the Pcv fitting at the front of the valley cover. It hits the blower where it is now
|
|
|
Post Reply
|
|
|