01-28-2019, 10:11 AM | #1 |
Drives: 2015 BVM Camaro 1LE (2SS/RS) Join Date: Mar 2012
Location: Leesburg, VA
Posts: 971
|
Can you re-install 1LE front splitter?
I'm considering repainting my front bumper and vinyl wrapping my splitter. I have to drill out the rivets and remove the splitter for this. Can you re-mount the 1LE splitter to the bumper? The rivets will be need to be replaced but is the rest of the hardware reuseable?
Last edited by Turbo_J89; 02-17-2019 at 08:22 PM. |
01-28-2019, 01:33 PM | #2 |
Tri-County Camaro SWFL
|
Only the rivets under the car should need to be replaced. But to answer your question, yes you can reattach the bumper assuming you dont break any of the tabs.
__________________
|
01-28-2019, 01:45 PM | #3 |
Drives: 2014 yellow 2SS/RS Join Date: Apr 2015
Location: Stoney Creek, Ontario
Posts: 488
|
I would think you could re-attach the splitter in the correct spot with all new rivets since the holes will already be there. I no when installing the splitter to a new bumper, you need the template to align it corrrectly.
__________________
K&N, Borla ATAK axle back, resonator delete, Speed Engineering headers,Vitesse, Zl1 wheels, ACS rocker panels, 1LE splitter
|
01-28-2019, 06:33 PM | #4 |
Drives: 14 SS/ 1LE Join Date: Jun 2013
Location: parts unknown
Posts: 922
|
You could also replace the rivets with bolts and nuts if you wanted to
__________________
2014 1SS/1LE
AGP 57/57s, E85 + meth injection, Monster triple, ZL1 diff swap, Z28 coilovers |
02-09-2019, 03:19 PM | #5 |
Drives: 2015 BVM Camaro 1LE (2SS/RS) Join Date: Mar 2012
Location: Leesburg, VA
Posts: 971
|
Splitter Hardware
OEM Aluminum rivets
Last edited by Turbo_J89; 03-29-2019 at 08:26 PM. |
02-09-2019, 04:52 PM | #6 |
Drives: 2015 BVM Camaro 1LE (2SS/RS) Join Date: Mar 2012
Location: Leesburg, VA
Posts: 971
|
OEM Plastic rivets
Last edited by Turbo_J89; 03-29-2019 at 08:26 PM. |
02-10-2019, 09:54 AM | #7 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
I just went through this, we repainted the fascia/bumper cover. Originally I was going to tape off the splitter.......but my paint guy really wanted me to remove everything for a better paint job. He was right. I thought I could get "good enough" hardware from Lowe's or Ace. I was not able to, so I went down the OEM route. They are not cheap!
All of the rivets went on with my rivet gun, it has several tips which came in handy since the plastic rivets are bigger. 92231490 Rivet, Front Bumper Fascia Molding, 10ea (plastic ones on the top of the facia, hold the 2 mounting strips on) 11546342 Rivet, Front Bumper Fascia, 8ea (these attach to the rear of the splitter) 11546343 Rivet, Front Bumper Fascia, 25ea (these attach to the front of the splitter)
__________________
|
02-10-2019, 11:41 AM | #8 |
Drives: 2015 BVM Camaro 1LE (2SS/RS) Join Date: Mar 2012
Location: Leesburg, VA
Posts: 971
|
Thank you! Those part numbers aren't easy to find.
Last edited by Turbo_J89; 03-29-2019 at 08:17 PM. |
02-10-2019, 09:27 PM | #9 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
A friend painted it, actually he was giving tutelage. He doesn’t do it as a job, it took us 2 1/2 weeks. Mostly because I’m slow, lol!
I wasn’t going to repaint it, he shamed me into it. It was very rough, but being a dark color the blemishes did not show up until you got close
__________________
|
02-13-2019, 06:14 PM | #10 |
Drives: 2015 BVM Camaro 1LE (2SS/RS) Join Date: Mar 2012
Location: Leesburg, VA
Posts: 971
|
Well guys, I received the aftermarket metal and plastic rivets to remove and re-install the 1LE Splitter for $35 shipped. I plan to install 1 of each this weekend to test them out.
Last edited by Turbo_J89; 03-09-2019 at 03:41 PM. |
02-15-2019, 04:33 PM | #11 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
Where did you get them from and what part numbers did you order?
__________________
|
02-15-2019, 09:32 PM | #12 |
Drives: 2015 BVM Camaro 1LE (2SS/RS) Join Date: Mar 2012
Location: Leesburg, VA
Posts: 971
|
I'll PM you.
Last edited by Turbo_J89; 03-29-2019 at 08:16 PM. |
02-16-2019, 06:51 PM | #13 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
Greatly appreciate the effort you are putting into this Turbo. I sure want to save $$$ the next time I do this
__________________
|
03-10-2019, 12:56 PM | #14 |
Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012
Location: Detroit
Posts: 1,252
|
I am going through this too, bought a SS fascia, have to paint but I got so lucky with splitter found one for $30 on craigslist OMG. Mine didnt crack just got bent up so will try to repair it in case I crash again.
__________________
I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors.
|
|
|
|
|