12-13-2020, 07:04 AM | #1 |
Drives: 2017 ZL1 Join Date: Apr 2020
Location: South florida
Posts: 332
|
Toyo r888r
hey guys, I'm wondering if I can put the 315/30/20 on the rear of my 17 zl1 without clearance issues ? Any input is appreciated
__________________
2017 ZL1 M6 Silver Ice Metallic
|
12-13-2020, 09:07 AM | #2 |
Drives: 2018 1SS 1LE Join Date: Jul 2012
Location: Michigan
Posts: 287
|
Looks like you beat me to the question.
__________________
2018 SS 1LE—707rwhp, 615rwtq
2009 Pontiac G8 GT—605rwhp, SOLD |
12-13-2020, 01:10 PM | #3 |
Drives: 2018 ZLE Join Date: Jul 2014
Location: Ontario, Canada
Posts: 580
|
yes
|
12-13-2020, 03:06 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,575
|
Yes.
You may want to relocate the driver side body wiring harness before you put on these steamrollers.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
12-13-2020, 09:37 PM | #5 |
Drives: 2017 ZL1 Join Date: Apr 2020
Location: South florida
Posts: 332
|
Thank you guys
__________________
2017 ZL1 M6 Silver Ice Metallic
|
12-17-2020, 06:27 PM | #6 |
Drives: 2018 Blue Camaro SS 1LE Join Date: May 2018
Location: Lewisville, TX
Posts: 2
|
Are spacers needed to run these tires?
|
12-17-2020, 08:54 PM | #7 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,575
|
Not after harness relocation, technically speaking. It's a bit close for my taste and I added 5mm spacers, if only for peace of mind and the slightly "pokey" stance.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
12-19-2020, 08:11 AM | #8 |
Drives: 2017 ZL1 Join Date: Apr 2020
Location: South florida
Posts: 332
|
I decided to try the nitto555r II. In 305/30/20. I have a spare set of rear factory wheels
__________________
2017 ZL1 M6 Silver Ice Metallic
|
|
|
Post Reply
|
Thread Tools | |
|
|