07-01-2022, 12:34 PM | #1 |
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Michigan
Posts: 1,380
|
The rabbit hole deepens...
Just bought a GoPro with external magnetic mount for my car, along with dragy for when I go to the track next week...
I can't wait to look stupid in front of everyone since it'll be my first time ever going.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | K&N Typhoon CAI | LT2 Ported | 95mm ZR1 TB | DOD Delete | BTR Stage I Cam | ECM, TCM & E85 |Tuned by: Shane Hinds | Dyno: 510 rwhp 472 rwtq
|
07-01-2022, 12:53 PM | #2 |
Shadow Gray '19 ZLE M6
|
Have fun & be safe out there!
If you're interested, these are the GoPro settings I've found to work best... https://www.camaro6.com/forums/showthread.php?t=606145 If you're mounting the camera outside the car, you can probably leave ISO to utilize the max range. I limit it for in-car footage so that the interior isn't too dark and the exterior isn't overly blown out. Just make sure HyperSmooth is off. If you leave it on, the camera will pan left and right as you go around corners.
__________________
2019 ZL1 1LE | M6 | SGM | PDR | CF Dash | Nav | Wheel Locks
PPF | Paint Correction | ZL1 Addons Rock Guards | ZL1 Addons Lift Pads | ZL1 Addons Feather Lite Tow Hook | JWM Smoked Sidemarkers | Wildhammer Smoked Rear Reflectors | JWM License Plate LEDs | RotoFab CAI | ADM IC Reservoir v2 | BC Forged RZ05 | SPL Toe Arms | BW Brake Deflectors | CMS Roll Bar | Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) | '00 WS6 (bolt-ons, heads, cam, 12 bolt) | '05 CTS-V (bolt-ons, short throw) | '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) | '01 WS6 YouTube |
07-01-2022, 01:21 PM | #3 | |
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Michigan
Posts: 1,380
|
Quote:
I'll have to read those settings. Also, LOL at you bullying some poor defenseless Porsche Also for clarification going to Dragstrip.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | K&N Typhoon CAI | LT2 Ported | 95mm ZR1 TB | DOD Delete | BTR Stage I Cam | ECM, TCM & E85 |Tuned by: Shane Hinds | Dyno: 510 rwhp 472 rwtq
|
|
07-01-2022, 06:12 PM | #4 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,396
|
just for clarification, the dragy is for when you aren't on the track haha
i've tossed around buying a go pro. they are a bit intimidating now bc it ain't just a camera you stick to your car anymore, so many features & options. get some footage of you driving around mi this fall. pretty place.
__________________
2016+ camaro: everyone’s first car
|
07-02-2022, 08:51 AM | #5 | |
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Michigan
Posts: 1,380
|
Quote:
Its actually not to bad, but the settings that were suggested were not exactly kosher. But they were close, some features I had to leave enabled. 2.7k wide Hypersmooth: On Bitrate: High ISO Max: 6400 Everything else is set to default Was testing the mount on my helmet. Thought video came out pretty well. Forum mods tend to frown upon my videos, so I won't post it. But will send in a PM instead.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | K&N Typhoon CAI | LT2 Ported | 95mm ZR1 TB | DOD Delete | BTR Stage I Cam | ECM, TCM & E85 |Tuned by: Shane Hinds | Dyno: 510 rwhp 472 rwtq
|
|
07-02-2022, 09:09 AM | #6 |
Retired from GM
Drives: 2017 Camaro Fifty SS Convertible Join Date: Mar 2017
Location: Detroit
Posts: 5,233
|
Joining this thread so I can keep the link to GoPro settings fresh and in reach for when I set up at CF.
__________________
2017 CAMARO FIFTY SS CONVERTIBLE
A8 | MRC | NPP | Nav | HUD | GM Performance CAI | Tony Mamo LT1 V2 Ported TB | Kooks 1-7/8” LT Headers | FlexFuel Tune | Thinkware Q800 Pro front and rear dash cam | Charcoal Tint for Taillights and 3rd Brakelight | Orange and Carbon Fiber Bowties | 1LE Wheels in Gunmetal Gray | Carbon Fiber Interior Overlays | Novistretch bra and mirror covers | Tow hitch for bicycle rack | |
07-02-2022, 09:21 AM | #7 |
Retired from GM
Drives: 2017 Camaro Fifty SS Convertible Join Date: Mar 2017
Location: Detroit
Posts: 5,233
|
What track are you going to and on what day? I’m thinking seriously of going to Milan on Wednesday before leaving for CF on Thursday. I’d say this is a 90% chance. Rain being the only hedge here.
__________________
2017 CAMARO FIFTY SS CONVERTIBLE
A8 | MRC | NPP | Nav | HUD | GM Performance CAI | Tony Mamo LT1 V2 Ported TB | Kooks 1-7/8” LT Headers | FlexFuel Tune | Thinkware Q800 Pro front and rear dash cam | Charcoal Tint for Taillights and 3rd Brakelight | Orange and Carbon Fiber Bowties | 1LE Wheels in Gunmetal Gray | Carbon Fiber Interior Overlays | Novistretch bra and mirror covers | Tow hitch for bicycle rack | |
07-02-2022, 10:07 AM | #8 | |
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Michigan
Posts: 1,380
|
Quote:
Sorry should have clarified. Doing drag strip.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | K&N Typhoon CAI | LT2 Ported | 95mm ZR1 TB | DOD Delete | BTR Stage I Cam | ECM, TCM & E85 |Tuned by: Shane Hinds | Dyno: 510 rwhp 472 rwtq
Last edited by FlukeSS; 07-02-2022 at 10:20 AM. |
|
07-02-2022, 03:02 PM | #9 |
Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018
Location: Michigan
Posts: 1,380
|
Just got my external mount.
Its pretty ef'ing solid. Only worry I have is if rocks kick up and hit the camera. Don't fret the blue frame is removable but I was thinking in terms of safety if the camera falls off the mount it won't go and hit the ground, just scratch the F out of my car instead. Edit: Just bought the underwater cover for the camera, should be golden now and no blue thingy needed anymore.
__________________
2020 Camaro 2SS A10 | Rebuilt by: CBI Street Cars | 2" SE LT Headers | 3" SE X-Pipe | 3" MBRP Axle-Back | Pri & Sec Cat Deletes | K&N Typhoon CAI | LT2 Ported | 95mm ZR1 TB | DOD Delete | BTR Stage I Cam | ECM, TCM & E85 |Tuned by: Shane Hinds | Dyno: 510 rwhp 472 rwtq
|
|
|
Post Reply
|
|
|