Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


Bigwormgraphix


Post Reply
 
Thread Tools
Old 06-09-2019, 05:05 PM   #1
My First Camaro!
 
My First Camaro!'s Avatar
 
Drives: '18 5.7 RAM 1500 18' 1SS
Join Date: Jun 2009
Location: CA
Posts: 156
Wideband

Where is the best place to mount a wideband where it will not interfere with the O2 sensor?

New to FI, Tnks!
__________________
JRE Tune
My First Camaro! is offline   Reply With Quote
Old 06-09-2019, 05:59 PM   #2
TMS
 
TMS's Avatar
 
Drives: 2018 ZL1 1LE - HBM, PDR
Join Date: Jun 2017
Location: Rescue, CA
Posts: 321
This is where I put mine (passenger side).
__________________
JRE Tuned (HPTuners) | 15% OD (9.17" crank pulley) | TVS2300 Maggie Heartbeat Supercharger - 14 psi | E-50 (DSX Flex Fuel kit) | JMS FuelMax Fuel Pump Booster | LPE Big Bore High Volume DI fuel pump | LPE High Flow DI fuel injectors | LT5 95mm TB | RotoFab CAI | AEM X-Series OBD2 wide band gauge | Elite Engineering E2-X catch can | Borla S-type NPP Cat-Back 3" exhaust | Forgeline GTD1 5-lug Satin Graphite | SunTek wrap | C-Quartz Finest Reserve ceramic coated
TMS is offline   Reply With Quote
Old 06-09-2019, 09:10 PM   #3
My First Camaro!
 
My First Camaro!'s Avatar
 
Drives: '18 5.7 RAM 1500 18' 1SS
Join Date: Jun 2009
Location: CA
Posts: 156
Quote:
Originally Posted by TMS View Post
This is where I put mine (passenger side).
Any clearance issues?
__________________
JRE Tune
My First Camaro! is offline   Reply With Quote
Old 06-09-2019, 10:26 PM   #4
TMS
 
TMS's Avatar
 
Drives: 2018 ZL1 1LE - HBM, PDR
Join Date: Jun 2017
Location: Rescue, CA
Posts: 321
Quote:
Originally Posted by My First Camaro! View Post
Any clearance issues?

None
__________________
JRE Tuned (HPTuners) | 15% OD (9.17" crank pulley) | TVS2300 Maggie Heartbeat Supercharger - 14 psi | E-50 (DSX Flex Fuel kit) | JMS FuelMax Fuel Pump Booster | LPE Big Bore High Volume DI fuel pump | LPE High Flow DI fuel injectors | LT5 95mm TB | RotoFab CAI | AEM X-Series OBD2 wide band gauge | Elite Engineering E2-X catch can | Borla S-type NPP Cat-Back 3" exhaust | Forgeline GTD1 5-lug Satin Graphite | SunTek wrap | C-Quartz Finest Reserve ceramic coated
TMS is offline   Reply With Quote
Old 06-09-2019, 10:54 PM   #5
My First Camaro!
 
My First Camaro!'s Avatar
 
Drives: '18 5.7 RAM 1500 18' 1SS
Join Date: Jun 2009
Location: CA
Posts: 156
Quote:
Originally Posted by TMS View Post
None
Oh wow, lots of room. I have yet to even jack the car up, still on temp plates.

TYTY!
__________________
JRE Tune
My First Camaro! is offline   Reply With Quote
Old 06-13-2019, 08:53 AM   #6
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: BLUE CAMARO ZL1 1LE M6
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,262
Nice job guys.

Ted.
__________________
www.jannettyracing.com
Celebrating 35 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 06-13-2019, 09:15 AM   #7
TMS
 
TMS's Avatar
 
Drives: 2018 ZL1 1LE - HBM, PDR
Join Date: Jun 2017
Location: Rescue, CA
Posts: 321
Quote:
Originally Posted by JANNETTYRACING View Post
Nice job guys.

Ted.


Thanks Ted.

Your off road pipes should arrive today. Iím guessing they donít have an extra bung for the wideband? In which case Iíll repeat this process.

Trevor
__________________
JRE Tuned (HPTuners) | 15% OD (9.17" crank pulley) | TVS2300 Maggie Heartbeat Supercharger - 14 psi | E-50 (DSX Flex Fuel kit) | JMS FuelMax Fuel Pump Booster | LPE Big Bore High Volume DI fuel pump | LPE High Flow DI fuel injectors | LT5 95mm TB | RotoFab CAI | AEM X-Series OBD2 wide band gauge | Elite Engineering E2-X catch can | Borla S-type NPP Cat-Back 3" exhaust | Forgeline GTD1 5-lug Satin Graphite | SunTek wrap | C-Quartz Finest Reserve ceramic coated
TMS is offline   Reply With Quote
Old 06-13-2019, 09:54 AM   #8
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: BLUE CAMARO ZL1 1LE M6
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,262
Quote:
Originally Posted by TMS View Post
Thanks Ted.

Your off road pipes should arrive today. Iím guessing they donít have an extra bung for the wideband? In which case Iíll repeat this process.

Trevor
no but you can now use one of the rear ports.
__________________
www.jannettyracing.com
Celebrating 35 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 08-04-2019, 06:45 PM   #9
kgf
 
kgf's Avatar
 
Drives: 2016 Camaro 2SS
Join Date: Dec 2015
Location: Arkansas
Posts: 53
Your install looks good. Very interested in installing sensor in same location. What is involved in removing the passenger side catalytic converter?

Does it require unbolting both sides at the factory header and dropping down or do you have to remove more of the exhaust system to remove the cat?

I don't have a lift and will have to remove this on jack stands. Any instructions will be appreciated.



Quote:
Originally Posted by TMS View Post
This is where I put mine (passenger side).
kgf is offline   Reply With Quote
Old 08-04-2019, 10:06 PM   #10
Dysan911

 
Dysan911's Avatar
 
Drives: 2017 50th Anniversary 2SS
Join Date: Sep 2016
Location: Jacksonville, FL
Posts: 930
Shouldn't the WB be setup on the Drivers side for Bank 1 or does it not matter?
__________________
Former Ride: 17 Camaro 2SS, M6 - Fifty | Procharger P1SC | 3.7 Pulley | Stage 2 IC | Race Bypass | DSX FF Kit | JRE Custom E85 Flex Fuel Tune | LT4 Fuel System | JMS Voltage Booster | MSD Plug Wires | American Racing 1-7/8's LT Headers Full System Catback | Baro Breakout Harness | LT4 Map Sensor | Katech Ported TB | MMS Oil Catch Can | 160 Thermo | Solo Performance J-Pipes

Dysan911 is offline   Reply With Quote
Old 08-05-2019, 06:52 AM   #11
kgf
 
kgf's Avatar
 
Drives: 2016 Camaro 2SS
Join Date: Dec 2015
Location: Arkansas
Posts: 53
Good question. Might be a question for Ted.

Only reason I am picking the passenger side is because the drivers side doesn't have much room. On the passenger side, the existing O2 sensor is mounted in the flange and the pipe is open to put in the wideband. On the driver side, the O2 sensor in already located in the pipe and doesn't give much of an option for a wideband.
kgf is offline   Reply With Quote
Old 08-05-2019, 06:56 AM   #12
Mick0311
 
Drives: 2018 Camaro 2SS Redline
Join Date: Mar 2019
Location: WA
Posts: 100
Why a narrow and wide band vs one or the other?
I understand the pros to going with the wide band over the narrow band.
Is the ECM seeing both or is it just used for tuning?
Mick0311 is offline   Reply With Quote
Old 08-05-2019, 07:52 AM   #13
TMS
 
TMS's Avatar
 
Drives: 2018 ZL1 1LE - HBM, PDR
Join Date: Jun 2017
Location: Rescue, CA
Posts: 321
Quote:
Originally Posted by Dysan911 View Post
Shouldn't the WB be setup on the Drivers side for Bank 1 or does it not matter?


It doesnít matter.
__________________
JRE Tuned (HPTuners) | 15% OD (9.17" crank pulley) | TVS2300 Maggie Heartbeat Supercharger - 14 psi | E-50 (DSX Flex Fuel kit) | JMS FuelMax Fuel Pump Booster | LPE Big Bore High Volume DI fuel pump | LPE High Flow DI fuel injectors | LT5 95mm TB | RotoFab CAI | AEM X-Series OBD2 wide band gauge | Elite Engineering E2-X catch can | Borla S-type NPP Cat-Back 3" exhaust | Forgeline GTD1 5-lug Satin Graphite | SunTek wrap | C-Quartz Finest Reserve ceramic coated
TMS is offline   Reply With Quote
Old 08-05-2019, 07:53 AM   #14
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: BLUE CAMARO ZL1 1LE M6
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,262
Quote:
Originally Posted by Dysan911 View Post
Shouldn't the WB be setup on the Drivers side for Bank 1 or does it not matter?
Does not matter, what ever side gives you the clearance you need.

Quote:
Originally Posted by kgf View Post
Good question. Might be a question for Ted.

Only reason I am picking the passenger side is because the drivers side doesn't have much room. On the passenger side, the existing O2 sensor is mounted in the flange and the pipe is open to put in the wideband. On the driver side, the O2 sensor in already located in the pipe and doesn't give much of an option for a wideband.


Ted.
__________________
www.jannettyracing.com
Celebrating 35 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:09 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.