04-17-2021, 08:55 AM | #1 |
Fuse popping
Hey guys so I'm hoping to pick some of your brains.
Last year we had some private rental days on the strip. I figured what the heck and joined. I took out the passenger side seat and rears, to not only lighten the car but mostly to make room for my drag tires, tools, cooler, and Jack. However once I got back home and reinstalled everything I keep popping the fuse that controls the passenger power seating, and it seems to effect the heated and cooled seats on both sides. I suspect there is a short somewhere. |
|
04-17-2021, 10:27 AM | #2 |
Drives: '18 ZL1 1LE Join Date: May 2020
Location: KY
Posts: 219
|
I'd probably pull the seat back out and make sure you didn't pinch a wire. I assume the plug went back in fine, but if not, I'd also check to make sure you didn't get anything stuck inside the plug for the seat.
__________________
2018 ZL1 1LE - Summit White, PDR, Rotofab CAI, 95mm TB, CSP 2" catless LT's, JMS Voltage Booster, AEM X-series WB, DSX flex fuel sensor, Banks Data Monster, Tuned by Ted Jannetty, 5% Tint, Blackvue DR900S-2CH, Diode Dynamics lighting, IGL Kenzo ceramic coating
|
04-17-2021, 01:46 PM | #3 |
I have done a quick visual of the wire....it runs under the carpet then along the side board. I'm assuming something has happened because I was climbing in and out of the car that way on the track.
|
|
|
|
Post Reply
|
|
|