09-14-2018, 09:33 PM | #1 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
Ordered up a 60606 today
Looking forward to it. Just need those rear clamps? $530 free shipping. PM me for source
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
09-14-2018, 10:45 PM | #2 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Huh, 60606?
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
09-15-2018, 12:27 AM | #3 |
Drives: 2017 1SS/1LE Join Date: Sep 2016
Location: FL Panhandle
Posts: 1,559
|
|
09-15-2018, 01:34 PM | #4 | |
Drives: SW 1SS 1LE / Jeep XJ Join Date: Mar 2016
Location: WPB,FL
Posts: 799
|
Yup all you need is 2x Vibrant Performance 1176 for the rear.
Easy install Tone is a little more raspier, more volume. With NPP valve closed no drone. quick clip from last weekend at Autox gives you a taste at the beginning |
|
09-15-2018, 01:51 PM | #5 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
Determine what if anything after I get it on. Like the magnaflow rear section and intrigued by MBRP. Nice vid. Thx.
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube Last edited by Chris C 1SS 1LE; 09-15-2018 at 01:54 PM. Reason: Spelling |
09-15-2018, 02:03 PM | #6 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
Complete my thought... Too bad Corsa hasn't an NPP option.
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
09-15-2018, 03:53 PM | #7 |
Drives: 2018 1SS 1LE Join Date: Aug 2017
Location: Pa
Posts: 100
|
I did not use those clamps when mine was installed. Instead of the long clamps. We did it the proper way. Steve at RDP used a pipe expander on the factory exhaust, after the cut on the muffler side. They then slid the 60606 into the factory exhaust and used a standard clamp from Borla. Worked great, no leaks.
|
09-15-2018, 06:00 PM | #8 | |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
Quote:
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
|
09-15-2018, 08:10 PM | #9 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Thanks for the info.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
09-15-2018, 09:11 PM | #10 |
Drives: 2017 1SS 6spd Join Date: Jan 2011
Location: Utah
Posts: 2,869
|
KISS- use the clamps, IMHO of course. They work great and, well... keep it simple.
|
09-15-2018, 10:17 PM | #11 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
I've decided since a deal on the Magnaflow Competition axle back is to be had, i'll just do it all at once. I'm the only one that doesn't care if it is too loud, and I'm the only one paying for it. Perspective
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
09-17-2018, 10:22 PM | #12 |
Drives: 2017 1LE Join Date: Nov 2017
Location: Brooks, GA
Posts: 697
|
Will arrive 21 September. That's fair.
__________________
'17 Bright Yellow 1LE. PDR, STB, !CAGS
Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube |
09-18-2018, 08:07 AM | #13 |
SNSTRSS
|
Is this 3 inch or 2.75?
__________________
2016 Black Camaro 2SS A8 NP
|
09-18-2018, 08:45 AM | #14 |
Drives: 2016 Camaro 2SS Join Date: Apr 2018
Location: Central Texas
Posts: 1,011
|
Its 2.75in.
|
|
|
Post Reply
|
|
|