05-20-2020, 05:56 PM | #1 |
Drives: 2020 3LT Camaro 3.6L 1LE Join Date: Feb 2020
Location: San Diego
Posts: 257
|
Anyone ever intsalled a LED Bowtie on a 2020 3LT
I bought an LED Bow-tie from a Chevy Dealer (Part No. 84329529). The part fits the 2020, but the instructions are for an older car (printed 2018).
The light comes with a "splice harness" that gets plugged into a junction box behind the passenger's side of the bumper. When I look for the junction box (reference in picture,) I cannot locate anything electrical in that area. The only thing I have there is a plastic honeycomb box as part of the bumper. Any ideas where the jumper plug wire gets plugged into for a 2020 3LT? |
05-23-2020, 10:45 PM | #2 |
Long hauler
|
I don't have an answer for this but I feel like GM would have updated their install instructions for the refresh. Have you tried contacting the dealer about newer instructions?
__________________
2022 2SS 1LE - Window Sticker - Cold Air Inductions Elite Carbon CAI
2016 1LT v6 - Totaled Happiness: Infinite |
05-24-2020, 03:41 PM | #3 |
Drives: 2020 3LT Camaro 3.6L 1LE Join Date: Feb 2020
Location: San Diego
Posts: 257
|
|
05-25-2020, 04:46 PM | #4 |
Long hauler
|
Damn, I doubt they'll do it no charge but on the off chance they do it could be much easier that way.
Depending on the wire you could splice the headlight DRL wire, not sure if there's a wiring diagram or pinout. Maybe try to contact a company that has a history with these wires like Gen5DIY or the such, they could shed more light on it.
__________________
2022 2SS 1LE - Window Sticker - Cold Air Inductions Elite Carbon CAI
2016 1LT v6 - Totaled Happiness: Infinite |
01-17-2021, 09:15 AM | #5 |
Drives: 2017 Camaro 2SS Vert Join Date: Apr 2019
Location: Texas
Posts: 161
|
It was move to the drive side I believe starting with the 2019 forwards
|
01-19-2021, 10:44 PM | #6 |
Drives: 2020 3LT Camaro 3.6L 1LE Join Date: Feb 2020
Location: San Diego
Posts: 257
|
|
|
|
Post Reply
|
|
|