06-08-2020, 06:21 PM | #1 |
Drives: 2017 Camaro 1ss A8 Join Date: Nov 2019
Location: California
Posts: 114
|
Need help with Header Gaskets
Hello, I was wondering if it’s fine to re-use the Stock header gaskets and bolts for my new headers. My car currently has 11k miles if that helps. Thank you.
|
06-08-2020, 06:23 PM | #2 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,396
|
yes, they are fine to reuse.
__________________
2016+ camaro: everyone’s first car
|
06-08-2020, 06:29 PM | #3 |
Drives: 2018 2SS 1LE Black Join Date: Aug 2018
Location: Cape Cod
Posts: 638
|
The bolts are a no brainer but why go through all that work and reuse a gasket, there are enough things that could go wrong on that job?
|
06-08-2020, 06:32 PM | #4 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,396
|
it’s a multilayer steel gasket. you can reuse it an infinite amount of times as long as it never gets creased or folded.
__________________
2016+ camaro: everyone’s first car
|
06-08-2020, 06:40 PM | #5 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
Would highly recommend the Mr Gasket Ultra-Seal gaskets. They are much thicker and conform better than the stock GM ones. I put on new GM gaskets and they leaked nearly right away with my TSP headers. Swapped in the Ultra-Seals and never looked back.
https://www.holley.com/products/ls_p...ets/parts/5967 Also consider the Proform Wedgelock header bolts. I retorqued mine after 1000 miles and they were still to spec - very good product https://www.summitracing.com/parts/pro-66755
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
06-09-2020, 09:04 AM | #6 |
Percy's multi-layer aluminum are VERY good.
|
|
|
|
Post Reply
|
|
|