Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


Phastek Performance


Post Reply
 
Thread Tools
Old 12-03-2019, 07:15 AM   #1
devin.918
 
Drives: 2016&2010 6-speed SS
Join Date: Sep 2014
Location: Sapulpa, OK
Posts: 17
Lt1 valley cover with Lt4 blower?

Like the title says why cant you just block the hole on the lt4 blower off and use a lt1 valley cover?
devin.918 is offline   Reply With Quote
Old 12-06-2019, 05:30 PM   #2
Heater
 
Heater's Avatar
 
Drives: 2016 Camaro SS, 2009 BMW 135i
Join Date: Dec 2019
Location: Arizona
Posts: 10
It probably depends on your adapter plates. I just checked my lt1 with an lt4 blower and it has very minimal clearance. I think the PCV adapter on the valley cover would hit the snout as it sits now, you might have larger lt4 adapter plates than I or you might be able to grand the pcv adapter down a bit on the lt1 to make it fit. I am not sure if it would cause issues outside of fitment.

You will need to block off the hole on the bottom of the blower if you use the LT1 valley cover as it would cause a massive vacuum leak.
Heater is online now   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:15 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.