Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


Bigwormgraphix


Post Reply
 
Thread Tools
Old 12-02-2019, 11:49 AM   #1
teddyca
 
teddyca's Avatar
 
Drives: Blown C7 and 6th gen
Join Date: Aug 2012
Location: NorCal
Posts: 409
Going from a 92mm to 90mm will I need to retune

I am hoping not. I do have a WB I can monitor and HP Tuners for both cars so I can certainly make some small tweaks if needed. I was hoping however I could just swap pulleys and be good to go. I guess I should just log and see what happens.
__________________
14 Corvette Z51 Coupe - 655RWHP
A&A Ti Blower, Alky Control Meth kit, Kooks LT setup, Corsa Catback, Full APR CF kit, RK Sports CF hood, hell CF everything LOL

17 Camaro 2SS 50th edition. TOTALED 6/2019
K&N Intake, MRBP axleback, Eibach kit, 20" Z28 wheels, smoked lights all the way around, Rockford Fosgate system

17 Camaro 2SS 50th edition. Round 2- 8/2019 550/600 RWHP, Magnuson TVS2300, Rotofab Intake, Corsa Xtreme, Air Lift P3 System, 20" Stance SF-07, smoked lights all the way around, Rockford Fosgate system.
teddyca is offline   Reply With Quote
Old 12-02-2019, 01:14 PM   #2
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
Teddy you meant 95 correct? It will probably need just a little tweaking.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
Old 12-02-2019, 02:23 PM   #3
teddyca
 
teddyca's Avatar
 
Drives: Blown C7 and 6th gen
Join Date: Aug 2012
Location: NorCal
Posts: 409
Quote:
Originally Posted by laynlo15 View Post
Teddy you meant 95 correct? It will probably need just a little tweaking.
You are correct. I believe the car currently has a 95mm pulley on it, I just got my 90mm in the mail. I am guessing that is a bigger discrepancy and a retune is likely. Damn it.
__________________
14 Corvette Z51 Coupe - 655RWHP
A&A Ti Blower, Alky Control Meth kit, Kooks LT setup, Corsa Catback, Full APR CF kit, RK Sports CF hood, hell CF everything LOL

17 Camaro 2SS 50th edition. TOTALED 6/2019
K&N Intake, MRBP axleback, Eibach kit, 20" Z28 wheels, smoked lights all the way around, Rockford Fosgate system

17 Camaro 2SS 50th edition. Round 2- 8/2019 550/600 RWHP, Magnuson TVS2300, Rotofab Intake, Corsa Xtreme, Air Lift P3 System, 20" Stance SF-07, smoked lights all the way around, Rockford Fosgate system.
teddyca is offline   Reply With Quote
Old 12-02-2019, 02:53 PM   #4
oneredry
HYPER SS
 
oneredry's Avatar
 
Drives: 2016 Supercharged 2SS
Join Date: Feb 2014
Location: Troy OH
Posts: 1,252
if its by default and from the stock, you probably have the 98mm pulley. I went from 98 to 95, had to re-tune (just because I'm anal). but if your going by that much, then I'd say for sure, get it re-tuned. are you still on the canned tune?
__________________
Ordered: 1/15/2016
2000 status 02/01/16
3000 status 02/29/16
3400 status 03/07/16 TPW of 03/14/16
4200 status 03/17/16 in transit!
Delivered 03/23/16
2SS Hyper Blue | 6M | NPP | Mag ride | ceramic white Int. | Black out bow ties | P3 Gauge| Front splitter. | 6 pot upgraded brembo brakes. | Magnuson Supercharger/95MM pulley | Rotofab Intake | ZL1 side skirts | HRE FF04 wheels - Michelin PSS4 | ZL1 add ons rock guards and lift points.
| AWE touring - resinated catback with link pipes.
oneredry is offline   Reply With Quote
Old 12-02-2019, 02:58 PM   #5
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
Teddy skipped the 98mm and went to the 95mm and that's how it was tuned. It probably won't need a lot of change but you should call your tuner and see if he could do that for free since you just spent a shit load on the last tuning on the dyno.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
Old 12-02-2019, 03:53 PM   #6
oneredry
HYPER SS
 
oneredry's Avatar
 
Drives: 2016 Supercharged 2SS
Join Date: Feb 2014
Location: Troy OH
Posts: 1,252
Quote:
Originally Posted by laynlo15 View Post
Teddy skipped the 98mm and went to the 95mm and that's how it was tuned. It probably won't need a lot of change but you should call your tuner and see if he could do that for free since you just spent a shit load on the last tuning on the dyno.
agreed. if he already paid for the credits etc. it may not cost him that much then. when I had mine re-tuned (HP tuners) he only charged me 160 to re-strap it down and do 4 pulls/retune ect. hopefully his tuner is cool like that. either way, I'd re-tune it. he has alot of money involved anyway
__________________
Ordered: 1/15/2016
2000 status 02/01/16
3000 status 02/29/16
3400 status 03/07/16 TPW of 03/14/16
4200 status 03/17/16 in transit!
Delivered 03/23/16
2SS Hyper Blue | 6M | NPP | Mag ride | ceramic white Int. | Black out bow ties | P3 Gauge| Front splitter. | 6 pot upgraded brembo brakes. | Magnuson Supercharger/95MM pulley | Rotofab Intake | ZL1 side skirts | HRE FF04 wheels - Michelin PSS4 | ZL1 add ons rock guards and lift points.
| AWE touring - resinated catback with link pipes.
oneredry is offline   Reply With Quote
Old 12-02-2019, 04:19 PM   #7
L78toLT1

 
L78toLT1's Avatar
 
Drives: Hyper Blue 2016 2SS 6M
Join Date: Sep 2017
Location: North Ga
Posts: 1,786
Don't forget the belt. No way you will be able to use the same one when dropping 5mm
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned
L78toLT1 is offline   Reply With Quote
Old 12-02-2019, 05:37 PM   #8
KingLT1


 
KingLT1's Avatar
 
Drives: 2016 1SS NFG A8
Join Date: Aug 2017
Location: 46804
Posts: 6,764
If you add more air then you have to add more fuel to make more power and keep the AFR in a safe range...so yes the fueling will need touched up.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP
Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP
Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA
KingLT1 is offline   Reply With Quote
Old 12-02-2019, 09:55 PM   #9
hitmix300
2016 loaded 2SS
 
hitmix300's Avatar
 
Drives: Maverick X3 Turbo R
Join Date: Feb 2015
Location: United States
Posts: 242
Quote:
Originally Posted by KingLT1 View Post
If you add more air then you have to add more fuel to make more power and keep the AFR in a safe range...so yes the fueling will need touched up.
^^what he said

get a datalog and send it to your tuner. Whenever you make a change to the amount of air going to your motor you should have your tune checked out.
hitmix300 is offline   Reply With Quote
Old 12-03-2019, 10:07 AM   #10
teddyca
 
teddyca's Avatar
 
Drives: Blown C7 and 6th gen
Join Date: Aug 2012
Location: NorCal
Posts: 409
I appreciate everyone's feedback here. Not sure what the tuner will want to do. He is about 2 hours away so just going down is not so easy. I might just hold on to the pulley until I am ready for drop in pistons or something. Being naive here I figured I could pulley down a bit and be fine would just need to watch up top. I honestly thought I was at 92mm so 90mm wasnt such a drastic change. Now it looks like I will need a new belt and tune. I should be happy with enough for now. I have not even put 250 miles on this car yet. LOL
teddyca is offline   Reply With Quote
Old 12-03-2019, 06:59 PM   #11
teddyca
 
teddyca's Avatar
 
Drives: Blown C7 and 6th gen
Join Date: Aug 2012
Location: NorCal
Posts: 409
Quote:
Originally Posted by L78toLT1 View Post
Don't forget the belt. No way you will be able to use the same one when dropping 5mm

So are we confident the K080850HD wont work or are we assuming. I was under the impression it would fit if I decided to use?
teddyca is offline   Reply With Quote
Old 12-03-2019, 07:42 PM   #12
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
If your only dropping less then a 1/4" it should work.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
Old 12-03-2019, 08:03 PM   #13
teddyca
 
teddyca's Avatar
 
Drives: Blown C7 and 6th gen
Join Date: Aug 2012
Location: NorCal
Posts: 409
Well we shall see. I am going to enjoy it for now. I need to leave well enough alone. I want to get scared I will jump in the C7. LOL

Quote:
Originally Posted by laynlo15 View Post
If your only dropping less then a 1/4" it should work.
teddyca is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:37 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.