Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


AWE Tuning


Post Reply
 
Thread Tools
Old 11-25-2019, 01:01 AM   #1
ZL1_2017
 
ZL1_2017's Avatar
 
Drives: 2017 Camaro ZL1 M6
Join Date: Dec 2018
Location: Hacienda Heights
Posts: 144
Edlebrock 2650

Does anyone have pictures of an install Camaro Zl1 of the hood modification I'm hearing about. I'm hearing you have to cut the hood or rain catch under the carbon fiber insert. If you can send me a DM with your fix or a picture with no modifications needed. Thanks
__________________
Whipple 2.9L 32%Cam, Alky Dual nozzle Methanol kit, Ligenfelter Lower , 3.0 Griptec Whipple, ATI Dampner, 2" Ceramic Blk LTH Kooks, Cat Delete, Hurst Short Throw , Mcloeds RXT1200 clutch, Welds S77 rears , MT Et streets R rear, ,AEM wideband, Hp tuners, ARP head studs, JMS Voltage,LNC 2014,DSX Lowside
ZL1_2017 is offline   Reply With Quote
Old 11-25-2019, 01:07 AM   #2
ZL1_2017
 
ZL1_2017's Avatar
 
Drives: 2017 Camaro ZL1 M6
Join Date: Dec 2018
Location: Hacienda Heights
Posts: 144
Nevermind found it on page 2 Gotswap thanks
__________________
Whipple 2.9L 32%Cam, Alky Dual nozzle Methanol kit, Ligenfelter Lower , 3.0 Griptec Whipple, ATI Dampner, 2" Ceramic Blk LTH Kooks, Cat Delete, Hurst Short Throw , Mcloeds RXT1200 clutch, Welds S77 rears , MT Et streets R rear, ,AEM wideband, Hp tuners, ARP head studs, JMS Voltage,LNC 2014,DSX Lowside
ZL1_2017 is offline   Reply With Quote
Old 11-25-2019, 07:10 AM   #3
EDFHOBBIES


 
EDFHOBBIES's Avatar
 
Drives: 16 SS & 17 ZL1 Both Yellow
Join Date: Jan 2014
Location: Houston
Posts: 2,851
Send a message via Skype™ to EDFHOBBIES



gotswap did a great job I cut mine like this just waiting for an insert from LPE.. I cut short so I made sure the insert fit..

I have a slight rub mainly from the tabs that stick down on the under side of the insert. I have a 1/2 in space under my lid if I didn't have the spacer it wouldn't rub I'm not sure if I want to cut tabs off a 1000.00 part yet.

Still looking at a AC copo hood to..
__________________
EDFHOBBIES is offline   Reply With Quote
Old 11-25-2019, 08:27 AM   #4
gotswap
 
gotswap's Avatar
 
Drives: 2019 ZL1 Crush
Join Date: Jan 2019
Location: Colorado Springs
Posts: 325
1.5" hole saw for the corners to give them a nice rounded edge and a cutoff wheel. Just go slow.
__________________
2019 Crush A10
E-Force 2650
670WHP 615WTQ

All besides the 2650 is bone stock down to the air filter.
gotswap is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:33 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.