LT1 CNC heads and hot cam - Page 2

6spdhyperblue · 10-18-2016, 01:20 PM

Quote:

Originally Posted by jayb998

Just got in the hot cam and CNC heads form GM Performance parts today for my 2016 m6 camaro should be in the shop in a couple weeks, gotta get the tuner free to come tune it. My local dealer is doing the install and is going to stand behind all the parts and labor during the factory warranty period. Im going to get some before and after runs on the same dyno for comparison.

keep us posted

triggerjerk · 10-18-2016, 02:54 PM

Quote:

Originally Posted by jayb998

Just got in the hot cam and CNC heads form GM Performance parts today for my 2016 m6 camaro should be in the shop in a couple weeks, gotta get the tuner free to come tune it. My local dealer is doing the install and is going to stand behind all the parts and labor during the factory warranty period. Im going to get some before and after runs on the same dyno for comparison.

Sweet.
Keep us updated.

TSloper · 10-18-2016, 03:03 PM

Definitely curious to see what increase you net even if it is with factory tuning.

Whitemaro6 · 10-18-2016, 03:43 PM

In this for numbers

AbsolutHank · 10-18-2016, 06:51 PM

Quote:

Originally Posted by drivingagain

How much do they want?

I called my local dealer today. It was $2400

TSloper · 10-18-2016, 07:12 PM

Installed or parts only?

BradfordCamaro · 10-18-2016, 07:34 PM

It would be nice to know the specs of the cam.

AbsolutHank · 10-18-2016, 07:44 PM

Quote:

Originally Posted by TSloper

Installed or parts only?

Parts only

Mr. Grumpy · 10-18-2016, 10:39 PM

slick3 · 10-19-2016, 10:44 AM

Need more popcorn... Excited to see your results OP

TSloper · 10-19-2016, 11:22 AM

19303897
LT1 Hot Cam NEW!
I: .577 / E: .577
I:228/E:248
116.5
Design for 1.81:1 rocker arms; requires non-afm lifters (See warranty statement on page 35)

SpeedIsLife · 10-19-2016, 11:35 AM

The bigger question is...

Will this make it a non-emissions friendly vehicle? Because that could cause a problem for a lot of people.

TSloper · 10-19-2016, 11:55 AM

Quote:

Originally Posted by SpeedIsLife

The bigger question is...

Will this make it a non-emissions friendly vehicle? Because that could cause a problem for a lot of people.

It's deemed as off-road use. I would not bank on keeping emissions in check if they sniff the exhaust.

jayb998 · 10-19-2016, 02:39 PM

Just got the exhaust in today went with the stainless works full kit. should go in the shop in in a week or so hoping the cam will sound good it is kinda small. the kit was 2250 and 2900 to install and they are going to put on the headers and exhaust when it is there also. no sniff test here in rural Missouri

10-18-2016, 07:34 PM	#21
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	It would be nice to know the specs of the cam. __________________

10-18-2016, 10:39 PM	#23
Mr. Grumpy Car Enthusiast Drives: 2017 Camaro SS FIFTY Join Date: Jul 2016 Location: Naperville, IL Posts: 163	__________________ 2017 SS Camaro FIFTY 6MT, Nav, NPP, Black Bowties, Mishimoto OCC, Skip Shift Eliminator, GM Footwell Lighting, NGM Splash Guards, GM Blackout Tail Lights (SOLD)

10-19-2016, 10:44 AM	#24
slick3 Drives: Garnet Red - 20 ZLE Join Date: Jun 2016 Location: Southern California Posts: 1,010	Need more popcorn... Excited to see your results OP Last edited by slick3; 10-19-2016 at 10:45 AM. Reason: Cant read.

10-18-2016, 03:03 PM	#17
TSloper Drives: 2016 Camaro SS Join Date: Jan 2016 Location: Mount Dora, FL Posts: 779	Definitely curious to see what increase you net even if it is with factory tuning.

10-18-2016, 03:43 PM	#18
Whitemaro6 Drives: 16 Summit white, Ceramic white 2SS Join Date: Jan 2016 Location: Places Posts: 419	In this for numbers

10-18-2016, 07:12 PM	#20
TSloper Drives: 2016 Camaro SS Join Date: Jan 2016 Location: Mount Dora, FL Posts: 779	Installed or parts only?

10-19-2016, 11:22 AM	#25
TSloper Drives: 2016 Camaro SS Join Date: Jan 2016 Location: Mount Dora, FL Posts: 779	19303897 LT1 Hot Cam NEW! I: .577 / E: .577 I:228/E:248 116.5 Design for 1.81:1 rocker arms; requires non-afm lifters (See warranty statement on page 35)

10-19-2016, 11:35 AM	#26
SpeedIsLife Drives: Current Camaro-less Join Date: Jul 2014 Location: Oregon Posts: 3,242	The bigger question is... Will this make it a non-emissions friendly vehicle? Because that could cause a problem for a lot of people.

10-19-2016, 02:39 PM	#28
jayb998 Drives: 2016 2SS M6 Join Date: Oct 2016 Location: Wentzville MO Posts: 50	Just got the exhaust in today went with the stainless works full kit. should go in the shop in in a week or so hoping the cam will sound good it is kinda small. the kit was 2250 and 2900 to install and they are going to put on the headers and exhaust when it is there also. no sniff test here in rural Missouri

User Name		Remember Me?
Password