You are browsing camaro6 
03-02-2024, 10:21 AM
|
#1 |
 Drives: 2017 LT RS Join Date: Jan 2018
Location: Nebraska
Posts: 3
|
Can't for the life of me get daytime running light unplugged
I'm trying to install a glowtie on my 2017 Camaro. I have the front right wheel off and have access to what I'm sure is the correct plug. I've pulled the red safety tab, but I can not unplug it no matter how hard I pull or wiggle.
Am I missing something? |
|
|
|
03-02-2024, 11:02 AM
|
#2 |
   
Drives: 2023 Chevrolet Camaro 2SS 1LE Join Date: Jan 2020
Location: Pennsylvania
Posts: 1,048
|
The plugs get a little dry rotted. I had the same issue when trying to install taillights. Honestly just push on the tab harder and pull harder. Then again I did what I suggested and broke the tab on one of the lights. Still plugged in and worked though.
__________________
Current: 2023 2SS 1LE
Prior: 2016 Camaro 1SS 2007 Mustang GT 2008 Civic Si |
|
|
|
|
03-02-2024, 11:57 AM
|
#3 |
         
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,663
|
Press and hold down the middle of the section just under the red safety lock you already pulled up, and the connector should come loose after a few wiggles and solid, but not excessive pulling. These connector types typically have a tab you need to release by pushing down on the tab well, and the red lock is simply preventing the tab from accidentally being released.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
